Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Any way to pull a <5mW module out of a DX true?

AjentX

0
Joined
Dec 1, 2008
Messages
104
Points
0
dont really care about the host to much.. just want to pull out the module to put it into a spirograph.. any help would be awesome.. (pictures are GREATLY appreciated) :)
 





Re: Any way to pull a <5mW module out of a DX true

1. Cut off the end of the laser with big scissors, limb cutter, etc
2. take a screwdriver. etc and bang it into the section with the button!
it should come out or *fly* out
 
Re: Any way to pull a <5mW module out of a DX true

potatorage said:
1. Cut off the end of the laser with big scissors, limb cutter, etc
2. take a screwdriver. etc and bang it into the section with the button!
it should come out or *fly* out

You can actually just twist the front cap off. Heres a vid someone made of it. http://www.youtube.com/watch?v=4o-0hQa9sss&watch_response

The module should press out.

--hydro15
 
Re: Any way to pull a <5mW module out of a DX true

Why not just leave the battery cover behind and tape the button down?
 
Re: Any way to pull a <5mW module out of a DX true

it dosnt look like the driver came out with it in the youtube vid :-/
 
Re: Any way to pull a <5mW module out of a DX true

Does DX ship the 5mw to the US?
 
Re: Any way to pull a <5mW module out of a DX true

dx will ship a 5mw to the usa

if you buy the new wish cr2 powered one from dx, you can easily remove the module. no banging or damaging it.

large pic warning!
http://i4.photobucket.com/albums/y144/sad_sagi/greenlaser1/DSCN7731.jpg

that is after removing the tube on mine. that outer ring can be screwed out, then the module simply falls out.

the module next to housing:
http://i4.photobucket.com/albums/y144/sad_sagi/greenlaser1/DSCN7748.jpg

here is said laser: http://www.dealextreme.com/details.dx/sku.10092

if you have a pen style, good luck getting the module out. there should be plenty of tutorials on that though
 
Re: Any way to pull a <5mW module out of a DX true

AjentX said:
it dosnt look like the driver came out with it in the youtube vid  :-/

it was just demonstrational video... driver will come out with module.. but the best solution was mentioned above... just remove the battery section and tape the button down or whatever....
 


Back
Top