650nm 100mw laser in c6 host

[Microbug]

Hi,
this is my first build. I already have goggles for 500-700nm wavelength lasers.
I am want to make a laser from the following parts:
C6 host assembly from survival lasers: here
Odic force 80mA - 300ma driver: here
100mw continuous 650nm Rohm diode: here
Odic force laser diode housing: here
I am on the cheap and don't want to spend more than around £35 / $55. I was wondering if the odic force 16mm diode housing here with an empty c6 host from dx would be a better way to go for the host?
Any help is much appreciated! I live in the UK, so shipping costs from abroad can be an issue for me (but survival lasers seems very reasonable at $9).

 

[Zeebit]

Whoops, lots of mistakes. Have to edit.

Everything will work together however, the 16mm module won't work because the standard module size is 12mm.

If you plan to get the C6 from DX you will have to buy a heatsink because it doesn't come with one.

 

[Microbug]

OK, I'll use a standard 12mm Aixiz module then. Doesn't the Survival lasers assembly come with a heatsink? I will have to get a heatsink separately if I get the DX one.

 

[Zeebit]

I have edited my post.

 

[Microbug]

Ok, thanks!

 

[SerpantSlayer]

You will have to get the heatsink separately if you get the host from DX, I think you would only save a few dollars though.