hey guys, I am selling a 1 watt Rgb laser module that I made fully modulated with analogue modulation to be able to make all colors laser beams. I say possibly 2 watts because the model on the module says w2000, but what i Ordered was a 1 watt Rgb module. These modules come with the ability to just make white, or possibly 7 colors if you order the TTL version. This one has been custom made by me with voltage controllers so you can control exactly how bright each color of the red laser, green laser, and blue laser are firing down to 0.01 volts. The voltage on each laser is controllable from around 2.00 volts up to 5.00 volts. The voltage controllers have 2 red buttons on each one, one decreases voltage by 0.01 on the left side, and the one on the right side increases voltage by 0.01. If you press and hold it will increase/decrease voltage rapidly. The voltage controllers are powered with 12 volts each, and can be turned up above 5 volts, and if you do that it may damage the laser module- I am unsure what would happen if you applied 12v on accident as it is only designed for 5v max applied to each color. I attached pictures of the final product, as well as some of the assembly pictures so you can see what’s inside. The reason I am selling it is that I purchased a much more powerful 10 watt module and no longer need this lower powered one which is still very excellent (and a lot less expensive!) I am asking $270 shipped to anywhere in the USA, which is just over the cost of the parts used to make this. I could ship internationally but it would be additional cost depending on cost to ship it.