- Joined
- Jan 14, 2009
- Messages
- 1,452
- Points
- 83
Hey ,
I am selling both my 1W CNI OEM 532nm and 50mW OEM F 473nm laser systems .
The 1W 532nm does over 1.5W , The head MUST be mounted on a heatsink with good thermal contact and a fan if anything or power will drop .
The 50mW 473nm does around 65mW .
1W 532 comes with driver and power supply ( 10 & 6V )
473nm comes with drive and needs a 5V DC supply .
I'm asking £200 or 329 USD before shipping , shipping inside the UK is £20 , outside to the USA is £65 .
Both systems are sold as is but are working fine and will be power measured before they are dispatched .
The cover of the 1W 532nm green was removed to take pictures and replaced and sealed again , this has not affected the laser in anyway and it still does 1.5W +
The power supply for the 1W 532nm is soldered direct to the cables that run to the driver
IMG_0422[1] by TwirlyWhirly555, on Flickr
IMG_0313[1] by TwirlyWhirly555, on Flickr
IMG_0308[1] by TwirlyWhirly555, on Flickr
IMG_0310[1] by TwirlyWhirly555, on Flickr
I am selling both my 1W CNI OEM 532nm and 50mW OEM F 473nm laser systems .
The 1W 532nm does over 1.5W , The head MUST be mounted on a heatsink with good thermal contact and a fan if anything or power will drop .
The 50mW 473nm does around 65mW .
1W 532 comes with driver and power supply ( 10 & 6V )
473nm comes with drive and needs a 5V DC supply .
I'm asking £200 or 329 USD before shipping , shipping inside the UK is £20 , outside to the USA is £65 .
Both systems are sold as is but are working fine and will be power measured before they are dispatched .
The cover of the 1W 532nm green was removed to take pictures and replaced and sealed again , this has not affected the laser in anyway and it still does 1.5W +
The power supply for the 1W 532nm is soldered direct to the cables that run to the driver
IMG_0422[1] by TwirlyWhirly555, on Flickr
IMG_0313[1] by TwirlyWhirly555, on Flickr
IMG_0308[1] by TwirlyWhirly555, on Flickr
IMG_0310[1] by TwirlyWhirly555, on Flickr