I just bought this, im just getting it to use personally and it would be sweet to have one i thought, mess with my friends and stuff haha, will this light up matches/pop ballons/cut tape like nothing or what? And does anyone know what i have to do to make it work properly? I believe i just have to mount it into a small metal box or something to keep cool? i want it to fit in my pocket though.
Thanks, and if you didn't notice I'm new here! Forum looks good!
Well, i cant post links, so here is a pic and the ebay listing i guess...
150mw 650nm red dpss laser module with TTL modulation
Please read this user manual before operate this laser modules safety and properly, and pay attention to that it will not be warranty by operating mistake!
The Output Wavelength(nm) 650
Power Output (mW) >150
Power Stability 5%
The Output Beamdiameter(mm) 2.0
Divergence Angle(mrad) [ch65308]1
Spot Ellipticity [ch65310]0.9
M2 Factor [ch65308]1.2
Preheat Time(min) [ch65308]15
Working Temperature([ch8451]) 10~40
Storage Temperature([ch8451]) -10~60
Input Voltage(VAC) 90-240
Modulation TTL Level 0~30k
Laser Size(mm3) 54x18x18mm
2. Directions:
1) Please connect the laser modules with the power supply by the cable. the serial number of them should be matched or it will damage the laser modules. please do not press the cable roughly which connetes the machine and power supply in case blocking the lines inside the laser machine
2) Please fix the laser machine onto a flat metal board to drop heat well, or you can put a cooler beside it.
3) Please do not use laser modules at the room full of dust and be careful of keeping machine clean. please stick labels on the light holes to protect the machine if the laser moduls are not used for a long time.
3. Point for attention:
1) Do not crash or shock the machine roughly.
2) Do not direct exposure the skin of hurman or animal, especially the eyes, under the laser light, or it may be harmful.
3) Do not open the machine and power supply. it would not be warranted by us
90$ SHIPPED
Thanks, and if you didn't notice I'm new here! Forum looks good!
Well, i cant post links, so here is a pic and the ebay listing i guess...
150mw 650nm red dpss laser module with TTL modulation
Please read this user manual before operate this laser modules safety and properly, and pay attention to that it will not be warranty by operating mistake!
The Output Wavelength(nm) 650
Power Output (mW) >150
Power Stability 5%
The Output Beamdiameter(mm) 2.0
Divergence Angle(mrad) [ch65308]1
Spot Ellipticity [ch65310]0.9
M2 Factor [ch65308]1.2
Preheat Time(min) [ch65308]15
Working Temperature([ch8451]) 10~40
Storage Temperature([ch8451]) -10~60
Input Voltage(VAC) 90-240
Modulation TTL Level 0~30k
Laser Size(mm3) 54x18x18mm
2. Directions:
1) Please connect the laser modules with the power supply by the cable. the serial number of them should be matched or it will damage the laser modules. please do not press the cable roughly which connetes the machine and power supply in case blocking the lines inside the laser machine
2) Please fix the laser machine onto a flat metal board to drop heat well, or you can put a cooler beside it.
3) Please do not use laser modules at the room full of dust and be careful of keeping machine clean. please stick labels on the light holes to protect the machine if the laser moduls are not used for a long time.
3. Point for attention:
1) Do not crash or shock the machine roughly.
2) Do not direct exposure the skin of hurman or animal, especially the eyes, under the laser light, or it may be harmful.
3) Do not open the machine and power supply. it would not be warranted by us
90$ SHIPPED
