Search results

Hi I also have a question about the Rkcstr driver. Because my blue-ray diode arrived today and I didn't have the driver yet. But I did have a spare 400mA Rkcstr driver and some spare SMD resistors. I wanted to drive my diode as close as possible to 100mA, And Rkcstr uses 2x 25.5Ohm resistors...

Something like this ::) http://www.instructables.com/id/X-Y-speaker-laser-show/

Nice 8-) Especially the Glow-In-The-Dark part with the circles. Really cool!

Hi, I got my components today, And my 10 uF tantalum capacitors turned out way to big. They where 3x5.7mm, witch is to big to fit on the board. Does anybody know where to get 10 uF tantalum capacitors that do fit on the board. Or where to get 10 uF ceramic smd capacitors, Because i can't find...

I also printed with windows, For me 15% was the perfect size ;)

O.k I got the right scale. With my printer it was equally 15%. About the capacitors, I guess he just doesn't have them. But will Tantalum or Electrolytic work? 10uF is 10uF right?

All right, I contacted my supplier and he sad that 10 uF smd ceramic capacitors did not exist. That the value was to high. And that he only had Tantalum and Electrolytic. Witch one is the best? And about the scaling of the image of woop's circuit. I tried to scale it down to 12%. I tried on two...

Ok, I odered the 0805 size. But witch voltage should the 10uf and 0,1uf capicators be?

Hi, I'm trying to built this cicuit, And i found a guy who can supply the SMD parts for me. Only witch size is the best: 0403/0603/0805 or 1206? And he also has got 10uH smd coils with the following diamentions: 5,6x5x5 mm Is this to big? Please let me know, Regard. Yoeri

Re: F.S. A Couple Of PS3 Blu-Ray Diodes You've Got PM

Nice to see all the goggles next to each other Great Review!

Very Nice ;D

Ok, Thanks for your replay. 10µF Makes it allot easyer to find;)

Hi rog8811, First of all, Nice built man ;) Second, where did you find the 10mf (MilliFarad) 16v capacitor (ceramic or not>?), Because i can't find any small ceramic one's that would fit in a aixiz module. And are you sure that it isn't a 10µF (MicroFarad) capicator, because that a way more...

Ok, Thanks for the fast reactions. I think i'll build a PS3 Blue-ray laser. And maybe build the High Power 360 laser when i've got some goggles. Thanks, Yoeri

But is it "Safe" To look at the dot on a white wall standing 0,5 meters afways. Does the reflection do any damage to your eyes? Thanks, Yoeri

Hi, I'm going to build a blue-ray laser, And i've got some safety questions. I know that the eye is way more sensetive to green lasers than to red lasers. And that refelections on white walls from 100mW+ green lasers can hurt your eyes. But what about violet lasers, how dagerous is the colour...

Hi all, good news This afternoon i was playing a little bit with my laser, Trying to get a better focus. Then i tried to focus from 10cm distance. ( Normally I alway's focused from about 10 feet.) I didn't there would be any difference but the dot became really small. So i tried a lighting...

Yes, I'm using 2 Cr123 rechargeble battery's en two 10ohm risistors in parralel. And i'm also using the aixiz housing with focus, and yes it's also a very small point. But no heat built up at all :-/ Maybe with your driver it will work ;) We'll see Thanks, Yoeri

ok, so volage is not the problem. Then it must be the current that causes my diode to not give enought mW And i thought windowless was the same as open can, Because the can is "Open" without an window. Anyway, My ir diode is: "Windowless" And my Red diode is: Closed can with window My doide...