Search results

My 100W LPM - Typically ran in 10W mode for readings down to thousandths.. Output on the lower end for my NUBM05Ts. I've done a watt more with a 2x18650 host but I like my 2x16340 / 2x18350 hosts better.. especially the Mech Mods. One of my NUGM01T builds:

Ahhh you got some already? noice. Would you say that you like it better than his BlackBuck or is it pretty much the same good quality? Also, did you ever get the power figures on your 47-A1? And since when did Nichia start naming their diodes like US military firearms? Also, I still have...

Did you order the remote pot from Vlad along w/ the drivers or are you getting your own? I'm actually waiting for the rest of the prototypes he had left to come in as well. I'm thinking of doing an up/down digipot. That way I can set the 64 to 256 steps however I want.. like 7 or 8 increments...

14mm x 28mm x 2-3mm without heat sink.. the heat sink you see in his image is the MINIMUM requirement for cooling that thing.

For real though, if you're not down to share the love I'm having larger ones made that screw down into the host (with driver seatS - 16.8mm, 20mm, and SXD sized recess for the non round variety) as well as have the option to be +20mm extended & finned up top (module will be recessed just enough...

Well I know... that you're going to split it with me?

ahhhh screw it.. she's goin in the 510!! I'll post pics when I'm done, just in case anyone wants to own her =)

I've got one more Nichia NUGM01T left.. I just finished putting together a black & silver Maraxus Iron Man w/ NUBM05T running on Lazeerer's V7 Mini 3.0A w/ 2x18350 (TangsFire 30A "1500mah" 750mah) and it looks nice and all but I'm used to the 6W-7W of power I usually get in these builds w/ the...

I forgot to send you my e-mail for invoice.. I'll do that now.. but also.. Do you still have 501B heat sinks? #8 - MINE! PM Sent!

It's been a LONG time since I've been active on a forum, lol.. muh bad!

My supplier states that they cooled, rather than heated, to remove the diodes. As far as I can tells they're as tough as usual. I've been running several of them hard over 5A for extended cycles with no issue. Gonna push over 6A on a handheld TEC cooled setup soon just to see what it'll do. I...

There we go.. now they work. I do have whole "blocks" but not complete banks with affixed diodes.. all of the diodes you see in these images have been extracted, my supplier just included the blocks this time. If you want the complete laser array without extraction I PM'd you with pricing not...

Red wanted some of these 05Ts, so I ordered some, along with some extras for others here on the forum.. but by the time I got em in word had hit about the new 08E and now I'm left with my wanger in my mitt.. I will start a FS thread for lots of stuff, just as soon as I get to 20 posts.

I KNEW I should have stocked up on NUBM06s.. damn Well, if anyone is interested in the NUBM05Ts, I have quite a few of them. About 15 of them left that have been cold extracted, very cleanly, with the lens/CAN removed and 10 extracted with lens & CAN still intact. I also have the two empty...

Remind me to take pictures for you of my NUBM05T pointers.. So far just about ALL of the NUBM05Ts I've tested so far can handle 5.2A-5.3A without issue. I will be shooting up towards 6A this week, just to see how much current it'll handle. I only have a 5.2W LaserBee (actual max is 5.446W) so...

+1 rep Flaminpyro sir, I would like to order a few WF-501B aluminum heat sinks, and some in copper, if you are still offering (Al - Qty. 2 & Cu - Qty. 1) I also would like to order two aluminum for the Ultrafire U-501B/SkyRay S-R5 and two copper. I also have an idea for a 3pc (or 4pc)...

Oh I have the cans off.. it's trying to get the LENSES out of the CANS that seems like the hardest thing I've ever had to do.:gun:

So, I've had some time with my shipment of Nichia laser ***.. In regards to the maximum power output, I cannot say, for I have a mere LaserBee AX3 5.2W which apparently maxes out at 5.443W instead of 5.2W, but I've had the NUBM44 and NUBM05Ts peggin that sum mitch hard and fast.. they were...

If that's the case they'll def give the 44 a run for it's money. In regards to the 05T's being new - this is my first time ordering them from my supplier and I was told that they were, so we'll see when they get here. If they are, next time I'll order in a few with the G bawlz attached. I'll...

I've got a few coming in that are supposed to be brand new extracted from block with can removed and lenses salvaged. Mr. Trent and I were talking and since his LPM can read much higher than my 5.2W Laserbee I will be sending one to him for testing. As soon as they're in and I get a video of the...