Search results

The vid shows the barrels spinning and laser "beam bursts" in green and blue at the same time, then individuality.try searching "hydguy11" on youtube.

The tripod is from a cheap led flashlight, other than that all raw materials. The beams only come out one tube. I had to plug the others cause it just looked like a solid beam when rotating at this speed.

I couldn't figure out if I should post this in the green or the blue area, so I put it here. This is my latest complete waste of time project. I say that because it has no practical purpose or use but I thought it would be cool to build. The blue is 445 @1.5 the green is around 300ma. i think...

I have had flash burn from welding, It came from just the reflections under my hood. It feels like you have sand in your eyes. Gets worse when you close them...but it did go away, 6 houres later.

:wtf: the screen even has cinimagic (think thats what they called it) coating, it almost sparkles white when the projector is off. The blacks are very dark. Dont they mix all colors to get the black?

Ok, If there is no "black light" how can my front projection DLP projector display black on a white screen 20 feet away?:thinking:

lense? I thought you were gonna send them with the diodes...:thinking:

Got mine (3) in a tin today. Thanks again nick & mattmagic.:gj:

I hope you just put that vid up..."1 views" when I watched it. I must have been the 1 :crackup:

Mattmagic100, Got my test load TODAY! I would like to thank you for this added bonus. I must have missed the instructions for all the switches...Again thank you.

DTR sells these for $40 each if you buy 3 or more. No need for a GB, IMO

Round 2 ? :thinking: I'm in my fortys, not sure I have the time for that :poke: :crackup:

Re: Guess what laser is this. Looks like 445 to me...

@ Things, Why no output with the green laser?

No fan in these. Way too much work for a host sale.

Hey all, I was reading this post http://laserpointerforums.com/f38/list-all-known-uv-fluorescent-material-43167.html and saw that led's floures under 405mn. light. So I had to try it. Yup, sure enough, it does, bright too @ 570ma. So i was :thinking: I should hook my meter to the LED. I set it...

And if anyone wants special mods like contour the body add finns, taper the front to a point, that sort of thing just say the word. Heck, if you have an idea for a whole new host let me know.

I use a 12 X 36 geared head lathe and a 9 X 42 supermax mill. I used to have a small Harbor freight lathe but found it useless for boring holes and cutting threads was a crap shoot. If you plan to only turn small O.D's or face short parts down its fine. However if you plan on building your own...

Well, I guess $100 is going to be a steal. I cant see charging more than that as this is a hobby and cost is a huge factor in any build. As it turns out these take ALOT longer to build than I thought. I have made some changes from the original...I changed the front to accept any lens 9mm X .05...

OK, I'll see if I can make up a few this weekend. See how long it takes and let you know.