Search results

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Hey Dr.L Don't worry that you may have let one slip by. It may have been a shipping issue or it may not have showed itself untill shortly after use.  ;) I trust Betty will work it out.  8-) Still awaiting a reply. I really do like it and...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l .       Everyone, please disgregard any MA reading in my prior test post, as there appearently was a bad wire to the meter. It took a long time to find the cause of those low readings. But it still doesn't explain why when it showed the lower...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Hey Dr, Don't take any of this personal. I seem to have an ability to p!$$ of some peopel when they don't know that I really am not mad, just trying to state facts as I see them, so just a heads up.  8-) The only thing I can come up w/ is...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l And does anyone else remember the 220mw gaurantee and a week satisfaction buy-back and such????? sure do. check the graph Dr. Lava sent you. if his tests were over 220mW, then I guess thats why it was shipped to you. also, it may have...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Sorry about that, I think I put a point in front of everyone of my MA reading by accident as that is how it appears on my meter. (you know, .300 for 300ma's) I will go fix that in a second. Why did it run so nice at such low currents??? I do...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Thanks AMK, Yes, it stays in tem-02 as soon as you turn it on and stays that way till the bats die. I suppose given this issue, that is probably the cause of the high IR and high Temps it reaches when it is drawing the way it should and its...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l HMMMM< I know I read a gaurantee of at least a 220mw output for a period of time which I don't recall, first 20 seconds I think and hold above 200 average during the first 2 minutes, and if it couldn't, then it wasn't supposeto ship?? As for...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Pic of the beam shot. Sorry for my damaged camera that barely works now, but you can see the two dark lines like in the picture I posted earlier of a TEM-02 beam.

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Pic of the dot. Can't see much detail other than the oblonged shape. Laser was at approx. 15ft. from the wall and focussed approx. halfway out. Gets much worse if focused more out, but couldn't get a good shot of it that way.

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Pic of my coffee table in the living room as my work station is a mess! ;D

Re: **** True >200mW 532nm S-KY PGL-200 handheld l ***EDIT*** Everyone, please disgregard any MA reading in this test post if they are below 1.5A draws, as there appearently was a bad wire to the meter. But the rest of the info should be acurate. Sorry for any confusion caused by this. It...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Hey Ref, Eventhough mine is screwed, I thought I noticed the same thing. But also noted that when sitting on the table shooting the Kenometer, (without moving it at all) that when I would just lay my hand on it, it would jump 20-30mw just...

Hey Blue, I will send another out in a few minutes. Coming from "gtx440...@... so you will recognise it. Thanks, Joe

Hey Blue, I have sent you a few e-mails last/this week. Awaiting your reply. Thanks, Joe

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Well Guys, Glad to hear that the others are doing well.  :) Mine is another story, go figure.  >:( Now that my company has gone, I had a better chance to look this laser over a bit better. Figured on pulling load tests and such, but when I...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Hey AMK, well, you got a good one it seems. Mine isn't so nice. (Had an idea for draw measuring, just find another 1/8 inch plug and pigtail the wires out, thus your meter becomes the deadmans switch with an amperage reading at hand, nice and...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Hey Mike, Thanks for the support. I am calm, beleive it or not, just have company, so hard to write and ask and test and play and entertain all at once whileworrying about this. Plus buliding 2 red open cans right now for them. ;D I think this...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l Hey, No biggy on first. Mine showed up at about 1-1:30pm, I would have to look again myself to be for sure. Well, I have run mine over and over now, and within the first 2-3 minutes, it won't break 200mw (short of a 225+/- burst for 2 seconds...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l . Update, Not so sure again now.               :-/ I slipped in a new battery, (4.12-volts) and it fired at 185mw and sat there for over 45 seconds before it slowly climbed up to a max of 217mw over two plus minutes. Let it cool for a...

Re: **** True >200mW 532nm S-KY PGL-200 handheld l . :)    :o    ;D Beat you all! Got it a about an hour ago. While opening, my face was grinning, while sliding the battery in, I was smiling. The finish looked great, the threads felt nice, the key worked well, the shutter was cool, the box...