Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Search results

  1. RYDorDIE278

    Blue laser broken Need help for fix

    was the red wire already detatched or did it disconnect when you opened it, looks like you need to solder the end of the red wire to the middle of the battery contact? but without you describing your problem we dont know where to start?
  2. RYDorDIE278

    [Holding] New G7 lens GB with 9mm/8.8mm holder

    we might have to run some comparison tests with this "mp9" lens in detail too, looks like it does well with maximum power
  3. RYDorDIE278

    Sci-Fi Lasers TheJoker301 Does Not Tell the Truth to Customers or Uphold His Claims

    Re: Sci Fi Lasers - Update Your a good man keeping us updated on the positive side also, some people are quick to update us on ANYTHING negative but when they get good customer service etc they dont post and clear things up or drop what they said.. + Rep if i can
  4. RYDorDIE278

    Sci-Fi Lasers TheJoker301 Does Not Tell the Truth to Customers or Uphold His Claims

    Re: Sci Fi Lasers - Update Paypal Does not support Buying lasers buddy forget the paypal dispute, There Are Good Reasons we support SCI-FI Lasers, Just Send TheJoker301 a Private Message and Use your manners and Keep a Positive Attitude!, Eitan Will Look After You and you will receive Your...
  5. RYDorDIE278

    The magical 520 nm Laser

    Maybe You used flat top batteries last year and the batteries wernt touching together in the middle? Glad you are re-United with your Laser and it is functioning correct
  6. RYDorDIE278

    Help with TrustFire clone

    Yea take a couple photos of the old driver and the space left for a new driver, just have a quick read or refresh yourself a bit on series and parallel wiring with LEDs as your understanding is a bit off ATM, you need to also know what the output voltage range is for the driver too, if you left...
  7. RYDorDIE278

    Question about a module I bought

    Already a Self admitted Member of the club i think?
  8. RYDorDIE278

    Sci-Fi Lasers TheJoker301 Does Not Tell the Truth to Customers or Uphold His Claims

    Re: Sci Fi Lasers - Update You guys need to be patient, your goods will turn up and Eitan does his best to keep ALL his customers happy equally, You will get quality product from eitan and you WILL have full support also AFTER your purchase, alot of other companys consider you low priority...
  9. RYDorDIE278

    Radioactive Rock colecting.

    I Know someone in NZ that has a part of a meteor, i was shown it and got to hold it also, it looked like an ordinary red coloured rock with ruged edges about 1ft x 1.5ft egg shape, it smashed a huge tree in his yard approx 10 Years ago, he has photos .. he has asked many avenues of the value but...
  10. RYDorDIE278

    G2 lens help needed.

    Have a search around Here at LPF for pictures and comparisons of Single element lens VS 3 element FOR EACH DIODE. you may find that what you are not happy with on your A140.... Is the Bar shape that some consider Normal Although the length of the barrel definitly sounds shorter with this lens...
  11. RYDorDIE278

    G2 lens help needed.

    I Had a similar problem when i had my m140 Jayrob c6 kit with a 3 element lens and focus adapter which was 100%, but when i changed to a G2 the jayrob focus adapter was hiting the heatsink before being focused to infinity, so i had to run a standard lens ring and burn my fingers from time to...
  12. RYDorDIE278

    Help with TrustFire clone

    If possible do the driver space in "mm" and just measure the depth of the pill from where the driver board will sit to the far inside of the pill X the diameter instead of the circumference, any idea how much current you want to each LED? There may be different ways the LEDs will be wired...
  13. RYDorDIE278

    FS: 9mm Diode in copper with x-drive, new 405-G-2 Lenses

    Re: FS: 9mm Diodes in copper, 405-G-2 Lenses, Drivers Awesome. Yea just wondered as the pictures told a different story. is there any chance you would solder a buck driver running 2.2A to a 9mm nichia in copper module. (with no lens) if so what price? Cheers
  14. RYDorDIE278

    FS: 9mm Diode in copper with x-drive, new 405-G-2 Lenses

    Re: FS: 9mm Diodes in copper, 405-G-2 Lenses, Drivers what lens are on the 9mm Diode/modules?
  15. RYDorDIE278

    SOLD: LaserBee 3.7W USB with Thermopile (LPM) (SOLD)

    Re: FS: LaserBee 3.7W USB with Thermopile (LPM) I cant say i have seen this meter before? what is the response time for around 95%?
  16. RYDorDIE278

    GB on 515 nm laser diodes?

    I Will definitly be keen on one of these pressed in an aixiz module with driver if possible, im not sure if you are actually making this an option eitan? i will wait until this is all official and you give us a Update On this GB Cheers
  17. RYDorDIE278

    Any other interesting hobbies to share?

    Hey no problems!, You had me searching all the amazing katana videos after re-viewing this vid. the guy cutting steel pipe and plate, then same guy cutting soccer ball, baseball then .22 BB pellet With targets at great speedZ, WTF almost a joke that guy is!
  18. RYDorDIE278

    Any other interesting hobbies to share?

    Im sure i have seen that video late last year sometime?? you may have posted in another thread once... it still amazes me! I love the speed of a Katana , multiple slices in the time joe bloggs can swing his baseball bat once
  19. RYDorDIE278

    Very heavy host ideas

    Yea i find myself looking at that intimidating thing on LPF from time to time lately and i know ive already asked to see it operating before, but again... I Need to see it going! BEAMSHOTS!
  20. RYDorDIE278

    Why is it doing this?? Spyder 3 Arctic 2W

    What brand battery is being used?


Back
Top