Search results

I´m not sure where you bought your lasers, but common companies like lazerer do not mark them as lasers. Refunding a laser in such a case is a nice service, but that´s probably also why WL is so expensive. I for myself had no bad experiences with WL, simply because I never bought anything from...

Exactly. As I said before, this host is using the small modules with max. 200mW output. So by saying a small madule you also know there are also bigger ones for more output that don´t fit into this host. This laser is doing something between 100 and 200mW and is way overpriced.

Hm well. I can give you some advice depending on what you are wanting to get. Up to 500mW lazerer.com is the best choice, but it will cost more than this laser above. But there you will get a up to spec laser and for $2 more a certificate too. You can also try o-like with it´s 500mW lasers...

Max. 200mW. Also, this host takes the small green modules with max. 200mW output being pumped by a 1W IR diode. But I doubt it will be even 200mW. More a 100mW greenie or even less. They are scammers selling fakes. See also here 5watt green laser? Really?

Did you also check the tailcap with a DMM it´s making contact? Btw. 3.6V is while a 18650 is discharged. A fully charged one will give you 4.2V

Heruursciences dosn´t sell on eBay anymore. He is banned there. He only sells on eBid and just 2 or more Wattages ones. Wanted to buy some from him, but he even dosn´t care to reply to messages. The diodes that are sold on eBay are quite accurate. They are operating in a range from 805 to...

LoL. Never ever. This host takes the small green modules that are outputting max. 200mW. My 400mW greenie takes 1700mA so a 4000mW greenie would need about 17A. With a 5W green he also would not need to point at the tabacco. It would set the white paper of the cigarette instantly into flames...

Here you are: Review: Lazerer LZSK - 532nm 400mW Green Laser Pointer w/ Case + Goggles :)

Giving warranty is not everything. Max from lazerer.com is a awesome guy giving you all the service you are needing. There is no need to argue with him if there should be a problem. He will make all his customers to be satisfited. Not the same with o-like. At least not in the near past. Mabe...

Like I said. I just wanted to make it more stable and so of course increase the duty cycle and even wasn´t thinking about increasing the output. So this was also a big suprise to me. Didn´t remove it at all. The glue is still there between both parts. I just removed carefully the glue at its...

Yes, you are right about everything being at ambient temp when I´m switching it on, but in a normal module where the brass with the cristals is just glued, it is heated up much much faster than the brass part with the diode and the housing. I checked this already with other modules before I got...

Just wanted to share an experiment with you that successed for me and increased the output power by about 40mW without potmodding it. My goal was not to increase the output but to make it more stable by better cooling the cristals so they do not heat up that fast. in the past I successed by...

Dude, no I´m not a girl but english is not my native language. It was already late here so I didn´t care about the spelling but more to take off the bra of my wife before going to bed. :na:

I simply soldered the bras part where the cristals are to the bras part where the diode is screwed in. First just at the places where the glue was missing. After that I removed the rest of the glue with a razor blade and applied there also some solder. This way I made sure the cristals are still...

Today I got the 150mW green module from lazerer. It peaked at 170mW and satteled down at 160mW. Tried my idea on how to get a more stable output and to my suprise the module is now peaking at 220mW and satteling down at 200mW. This all without potmodding! So I´m very happy with it. :)

Actually buying at o-like is like playing at lottery. You might be a lucky one by getting a on spec or even way overspec laser, or you can get something that is way underspec like already happened to many of us. That´s because O-like doesn´t measure the output of the lasers they are getting...

Is there a chance your greens are metered? I can see a big difference between 50mW and 100mW with my nacked eyes. The same with 100mW vs. 200mW and 200mW vs. 400mW. You can´t compare a video with some sort of fog to what you see in real under normal conditions.

That was also my intention. To get the best price/brightness ratio. That´s why I bought it. I´m not that much into burning, but if burning is what you need a blue or blueray us much much better. Of course you can get one of the expencive Optronics, CNI, Laserglow and whatsever with IR filter...

Ye3s, I know what you mean and such situations can happen to everyone. It´s just someone who got into such a situation usually will try to explain it directly but not hide till he will be found. This guy at least had access to internet and this forum so was not totally unreachable. There was no...

I´m with laserbee. This guy said he saw this thread and felt bad about it. So he had access to internet and this forum. He could explain the situation either officially or at least PM Murrat if he were honest, but he didn´t care till Murrat visited him. He felt safe Murrat won´t find him till he...