Re: Kryton Groove 1.4W 445nm FS
Unfortunately I don't have a LPM and the best I can offer is an approximation. I tested the driver output with a test load and measured it to be 1amp. According to DTR's testing of these diodes when pushed at 1amp they output 1.445W with a G2 lens that will be...
Up is my freshly built Kryton Groove 445nm laser.
Host: Kryton Groove
Driver Type: Buck
Diode: NDB7875 9mm 445nm
Current to Diode: 1amp
Lens: Single element & 3 element lenses included
It's a gently driven diode that is putting out around 1.4W with a G2 lens referencing DTR's tests. It can...
When I tested the my "original" circuit I had a string of 45 LED's setup and it consistently lit up 35 but when I tried 36+ they wouldn't lite up. (they did lite but extremely dim). Is there another error that could have caused this?
Unfortunately I ran out of time before my sprouts needed...
Now that would make for a very interesting thread, many moral pitfalls but if humanity willingly did this over only a few generations I'd bet a lot of suffering could be prevented.
So I built that circuit and my LM317 "seems to me" to heat up very quickly. How did you figure the efficiency? My circuit is slightly different from your sketch. My cap is 270uF @ 150V, and I used 35 LED's since the FV was about 3.4V, and I had my LM317 set to 300ma.
Atricle -> https://www.sciencedaily.com/releases/2016/01/160121110932.htm
Just wanted to share. There seems to be plenty of UFO enthusiasts here, I'm curious about the opinions/discussion on this.
That's what I though, just curious. FYI I appreciate your informed and factual responses. I do realize the war on abortion won't be won or lost here on LPF.
Too late.
Is that a belief you hold personally?
To add another question, can it be considered unconscious yet still a human life?
What changes a "clump of cells" into a baby? - Adam4d.com
If you're not sure, don't run it over - Adam4d.com
.