Search results

Now, that IS some funny s__t! I almost fell off my chair laughing... ;D ;D ;D but then I realized I'm in about the same position... :(

But still, you DO have them listed there in ascending order from "weakest" to "strongest" ;D

Re: GREEN LASER MODULE at price $10.50. last 7days So Standstone11, do you have anything available in the upper ranges of say 300, 400, 500mW, either modules or complete units? If so, could you post pricing AND specs, esp divergence? Also, there was a cute little 200mW Red pointer available...

I'm still in for the 10. Do not need heat sink removed. I want Wes to succeed! :D

I tested one of these in a housing with a big heatsink and it looked like 220-240mW is the sweet spot. It took 450mA to get 240mW after a glass Aixis lens. Above that it seemed to use a lot more current with little increase in power out.

Re: 12x Blu-ray SLEDS GB! 450mW!! Sanyo 12x!! Would it be fair to say that the 4x is likely to give us around 10x the life expectancy at powers we could already achieve with the PHR, but not necessarily more power than the PHR? I'm thinking it is not really worth replacing a PHR with a 4x in...

Re: 12x Blu-ray SLEDS GB! 450mW!! Sanyo 12x!! Dave, you certainly Are a daisy! And, that's good, because something may be about to hit the fan ;). Let's see now, where DID I stash those anti-depressants... :(

I sure hope it's not the smell of money slowly slipping away over a 45 day period! I don't think I could bear it.... :(

Re: 12x Blu-ray SLEDS GB! 450mW!! Sanyo 12x!! Hey AMK, please put me down for 2 in GB-4 if these turn out to be 6x or better. Thx

Yes, and if possible, connect the cathode (-) pin to the case, or at the very least, connect the case to ground to avoid static discharge problems that could damage the diode. Also, if you grab one of Igor's lenses when they are available, you can easily get 100mW out at a Very reliable current...

Re: 12x sled Feeler !!!!! I would go in for 2.

Re: 12x Blu-ray SLEDS GB! 450mW!! Sanyo 12x!! An Excellent job on the Diode Tester! Once Igor gets a hold of one of these diodes, it will end all the speculation for sure. And until his 405 AR coated glass lenses are ready, we don't have anything that can handle the power without melting...

Re: 12x Blu-ray SLEDS GB! 450mW!! Sanyo 12x!! It has been pointed out that many of these distributors tend to stretch the truth just a bit to make a sale. One has to wonder why sleds would be available for drives that are not even being sold yet...

Re: 6x Blu-ray SLEDS GB! Supply is almost dry! Hur Igor, that is exactly what my third diode did the first time I tested it! (The data I PM'd you the other day)

Here is a link to the PDF that has this: http://home.comcast.net/~kurtjo/projects/laser/LP3_Bluray.pdf Yes indeedy - for cathode connected to case.

Here is the parts list for the above schematic: Qty Ckt No. Description Dist Part No. Cost Comb Cost 2 C1,C2 10uF 16V MLCC X5R 1206 DK PCC2417ct-nd $0.45 $0.90 1 C3 .47uF 16V 805 $0.10...

Here is the schematic for a driver I used to power a PHR-803t type diode in a DX200 pointer host. It can be built on a board much smaller than .5"x.9" with a little patience.

I can provide you with a schematic and parts list for a boost driver for driving the bluray directly from a single lithium ion battery - but as rkcstr said - it may be easier just to get the Flexdrive. You will have to be good at building tiny circuit boards using surface mount components and...

I was just checking this thread to see how my order was coming along and now I can't tell if it's a group buy or GROUP THERAPY, lol. ::)

Okay, I can't stand it! Change mine from "a couple" to 7. Oops, had to wipe off some drool there. Seems to happen every time I start reading this thread for some reason... ;) Edit: Lens #2 Broadband