Recent content by Scoots

ElectricPlasma...The camera is EOS 1200D The specs are: PT 40k's Green 300 mw not running at full power Blue 300 mw The red is 2 lpc-826's knife edged ( it should be 4 but 2 are blown):yabbem: I would guess the power is around 400-500 mw

Beam shots from my partially built projector

I do plan to sell them at some point

Hi all, I've cobbled together a USB sound card + correction amp on 1 PCB and for the life of me I cant think of a good name for it. Any suggestions ??? I'm still tinkering with the design, I've added OVP for the RGB and Intensity channels suggested by James, the author of Laserboy. If anyone...

Did you set up the outputs of the correction amps to be 0v when no image is being displayed and +5 when there is ??

The galvo amps shouldn't need tuning, the problem is more than likely your correction amp. Can you post some close up pics of your correction amp and the circuit you used. Also what sound card are you using

Try linking pins 4 and 17 together

The pots are standard multi-turn ( 3 pins in a row ). If the DC/DC Converter you have has the same pin configuration and is the same size, you should be ok. I could not find a datasheet for the one you have, here is the datasheet for the one I used...

I have 6 boards left, I also have enough components to make 1 complete board

PM sent

Yes, I still have them.

I've got 8 correction amp bare pcb's that I wish to sell, I'm looking for $10 shipped anywhere in the world. If you want tracking please contact me for an exact price, alsy any profit I make from these will be donated to the forum. As I dont have that many posts I'm quite willing to send to a...

Hello every one, as titles says, Im getting fed up of trying these DX led drivers that dont really work. I saw a post on here using 2 of them, so I tried that with an 18650 battery and all i was getting was 550 mA, so enough is enough. If anyone has them for sale could you please message me or...

looking at your pics there is no +v on the switch as in the first pic ,just a wire going to your led

If you are using the original output lead positions, there will be no path from the battery to the output leads as you have removed all the components, If it was me I would drill a hole in the center and use that as your + and the case as the -