Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Full Colour Driver Extension for the White Fusion kit

I finished mine, but had some room left over in my enclosure so am now putting in a LCC & Greenie combined through a turning mirror to give me a stronger R/G/Y beam along side the 7 colour. With a 2 motor spiro on each.

What power Green Module would complement a LCC, I was thinking either a 30mw or 50mw.

Watcha think guys?

P.S. I still havn't got pics and info for that little hicup I had FML, but the driver is working great!
 





What power Green Module would complement a LCC, I was thinking either a 30mw or 50mw.

Watcha think guys?

Chroma shows a perfect yellow with a LCC(660nm) @ 250mw and 532nm @ 50mw.

Untitled.jpg


This second pic is with only 25mw of 532, you can see that it isn't enough....
Untitledv.jpg
 
Last edited:
Thanks KGB...50mw green it will be!

FML, got a new digi cam coming xmas so photos will follow.
Put new batteries in my DMM but havn't conected up with my test load on the Violet side yet to see what it will output at max.

Will keep you updated.

Jason
 
Yeah, but I would rather pot mod a 50mw down (providing it dont start mod hopping) rather than play russian roulette with a 30mw, if you know what I mean?

Anyway, im not too fussed with the perfectness of the yellow, im just trying to squeez as many lasers into a box as humanely possible:D
 
Thanks KGB...50mw green it will be!

FML, got a new digi cam coming xmas so photos will follow.
Put new batteries in my DMM but havn't conected up with my test load on the Violet side yet to see what it will output at max.

Will keep you updated.

Jason

I bought my wife a new Digi Cam for Christmas so hopefully it will capture all the colors better than my still cam on Vid.
 
Pyro, your drivers are now shipped!

Robjdixon, what's up buddy? You're making me nervous :D:confused:
 
hey I am interested in building a white fusion laser plus adding this but before jumping in over my head could someone please point me in the right direction fro how and what was used to make the beam make those patterns? what exactly was used?
 





Back
Top