- Joined
- Jan 12, 2008
- Messages
- 3,290
- Points
- 83
I have been working on a full colour PWM driver similar to the one in my RGV-lab laser to fit inside a portable unit. The shape of the board will follow the shape of the White Fusion Kit to save space.
The extension will feature:
> 3x DDL drivers for the lasers - no additional drivers required!
> Multi-turn potentiometers to adjust the colour balance.
> The drivers will be adapted to your diodes with the proper current setting.
> 26 programs! Rainbow, strobe, colour wash, rambling, static colours and much more!
> Two button inputs to control programs with an home function to make it easier to use.
> Memory saves the program you were in last.
> 16 million+ possible colours - that's over nine thousand!
> Inbuilt spike and reverse voltage protection + bleeding resistors on all channels.
> Input voltage: 9-12V DC. 3x 4.2v batteries will be fine.
> Dimensions: 63 x 35 x 25mm.
> Works with 405nm or 445nm diodes!
The following max currents are available, if your red diode for example can take 420mA safe, you choose the nearest LOWER current (391mA). This this so you wont have to worry about over-doing the potentiometers on the board when adjusting your white balance. Though you may choose the highest currents and go through the trouble with a DMM if you want.
You choose one max value for each of your red, green and violet-or-blue laser, independently of course.
695mA --> Read!
449mA
391mA
367mA
350mA
309mA
267mA
265mA
250mA
208mA
183mA
166mA
125mA
110mA
99mA
83mA
(± the tolerance of the resistors/potentiometers)
The driver board:
With the White Fusion kit:
Here is a sample of what it can do with the old version (shows 4 of the programs), but the video hardly justifies it's awesome colours!
Time-Tunnel simulation! With *THIS* new updated version.
A few more examples:
A few colours:
Read >>> Casio 445nm
Tutorial:
http://laserpointerforums.com/f51/rgv-driver-installation-tutorial-45774.html
Also a big thank you to Diachi and Niko for helping out!
_________________________________________________
Price: 550 SEK (Swedish Krona) each including shipping. (this covers the Paypal fee, so don't add it)
Accessories:
2pcs momentary push buttons with red push caps: $1.50
3pcs insulation pads + bushings for the regulators: $1
(The accessories are mandatory for the function of the driver, but if you already have them there is no need to buy them from me)
If you want, I can solder all the wires to the driver for power, buttons and laser diodes in ~15cm length for $5. I only have a limited supply of wire, I will offer this till they run out.
Orders list round 2:
User name, How many pcs, R-G-B max current in mA's, Accessories:
0 more drivers available, indefinitely.
By buying you understand that this driver may not be 100% safe and I am not responsible if of your diodes get damaged. I have done some hard testing and so far no diodes have died because of the driver.
Cheers!
The extension will feature:
> 3x DDL drivers for the lasers - no additional drivers required!
> Multi-turn potentiometers to adjust the colour balance.
> The drivers will be adapted to your diodes with the proper current setting.
> 26 programs! Rainbow, strobe, colour wash, rambling, static colours and much more!
> Two button inputs to control programs with an home function to make it easier to use.
> Memory saves the program you were in last.
> 16 million+ possible colours - that's over nine thousand!
> Inbuilt spike and reverse voltage protection + bleeding resistors on all channels.
> Input voltage: 9-12V DC. 3x 4.2v batteries will be fine.
> Dimensions: 63 x 35 x 25mm.
> Works with 405nm or 445nm diodes!
The following max currents are available, if your red diode for example can take 420mA safe, you choose the nearest LOWER current (391mA). This this so you wont have to worry about over-doing the potentiometers on the board when adjusting your white balance. Though you may choose the highest currents and go through the trouble with a DMM if you want.
You choose one max value for each of your red, green and violet-or-blue laser, independently of course.
695mA --> Read!
449mA
391mA
367mA
350mA
309mA
267mA
265mA
250mA
208mA
183mA
166mA
125mA
110mA
99mA
83mA
(± the tolerance of the resistors/potentiometers)
The driver board:
![PA130020.jpg](http://i279.photobucket.com/albums/kk149/FML_01/PA130020.jpg)
With the White Fusion kit:
![PA130037.jpg](http://i279.photobucket.com/albums/kk149/FML_01/PA130037.jpg)
![PA130038.jpg](http://i279.photobucket.com/albums/kk149/FML_01/PA130038.jpg)
![PA130039.jpg](http://i279.photobucket.com/albums/kk149/FML_01/PA130039.jpg)
![PA130040.jpg](http://i279.photobucket.com/albums/kk149/FML_01/PA130040.jpg)
Here is a sample of what it can do with the old version (shows 4 of the programs), but the video hardly justifies it's awesome colours!
Time-Tunnel simulation! With *THIS* new updated version.
A few more examples:
A few colours:
![P2200119-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200119-r3.jpg)
![P2200120-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200120-r3.jpg)
![P2200121-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200121-r3.jpg)
![P2200122-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200122-r3.jpg)
![P2200123-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200123-r3.jpg)
![P2200124-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200124-r3.jpg)
![P2200125-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200125-r3.jpg)
![P2200126-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200126-r3.jpg)
![P2200127-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200127-r3.jpg)
![P2200128-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200128-r3.jpg)
![P2200129-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200129-r3.jpg)
![P2200130-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200130-r3.jpg)
![P2200131-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200131-r3.jpg)
![P2200132-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200132-r3.jpg)
![P2200133-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200133-r3.jpg)
![P2200134-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200134-r3.jpg)
![P2200135-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200135-r3.jpg)
![P2200136-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200136-r3.jpg)
![P2200137-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200137-r3.jpg)
![P2200138-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200138-r3.jpg)
![P2200139-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200139-r3.jpg)
![P2200140-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200140-r3.jpg)
![P2200141-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200141-r3.jpg)
![P2200142-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200142-r3.jpg)
![P2200143-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200143-r3.jpg)
![P2200144-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200144-r3.jpg)
![P2200145-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200145-r3.jpg)
![P2200146-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200146-r3.jpg)
![P2200147-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200147-r3.jpg)
![P2200148-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200148-r3.jpg)
![P2200149-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200149-r3.jpg)
![P2200150-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200150-r3.jpg)
![P2200151-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200151-r3.jpg)
![P2200152-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200152-r3.jpg)
![P2200153-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200153-r3.jpg)
![P2200154-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200154-r3.jpg)
![P2200155-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200155-r3.jpg)
![P2200156-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200156-r3.jpg)
![P2200157-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200157-r3.jpg)
![P2200158-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200158-r3.jpg)
![P2200159-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200159-r3.jpg)
![P2200160-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200160-r3.jpg)
![P2200161-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200161-r3.jpg)
![P2200162-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200162-r3.jpg)
![P2200163-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200163-r3.jpg)
![P2200164-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200164-r3.jpg)
![P2200165-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200165-r3.jpg)
![P2200166-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200166-r3.jpg)
![P2200167-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200167-r3.jpg)
![P2200168-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200168-r3.jpg)
![P2200169-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200169-r3.jpg)
![P2200170-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200170-r3.jpg)
![P2200171-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200171-r3.jpg)
![P2200172-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200172-r3.jpg)
![P2200173-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200173-r3.jpg)
![P2200174-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200174-r3.jpg)
![P2200175-r3.jpg](http://i279.photobucket.com/albums/kk149/FML_01/P2200175-r3.jpg)
Read >>> Casio 445nm
Tutorial:
http://laserpointerforums.com/f51/rgv-driver-installation-tutorial-45774.html
Also a big thank you to Diachi and Niko for helping out!
_________________________________________________
Price: 550 SEK (Swedish Krona) each including shipping. (this covers the Paypal fee, so don't add it)
Accessories:
2pcs momentary push buttons with red push caps: $1.50
3pcs insulation pads + bushings for the regulators: $1
(The accessories are mandatory for the function of the driver, but if you already have them there is no need to buy them from me)
If you want, I can solder all the wires to the driver for power, buttons and laser diodes in ~15cm length for $5. I only have a limited supply of wire, I will offer this till they run out.
Orders list round 2:
User name, How many pcs, R-G-B max current in mA's, Accessories:
- Flaminpyro 5x R449 G695 B449 Shipped
- Cheech 1x R449 G449 B449 + wires, buttons Shipped
- tysonc1979 2x R449 G695 B449 + 2x wires, insulation kit Shipped
- netwave 1x R449 G695 B695 Shipped
- DjHeadie 1x RR449 G449 B449 + wires, buttons, insulation kit Shipped
- hydrogenman15 1x R449 G695 B449 + wires, insulation kit Shipped
- dieselmarine 1x R391 G449 B309 + wires, buttons Shipped
- sherap 1x R449 G695 B449 + wires, buttons, insulation kit Shipped
- wicked1 1x R449 G695 B449 + insulation kit Shipped
- DjHeadie 1x...?
0 more drivers available, indefinitely.
By buying you understand that this driver may not be 100% safe and I am not responsible if of your diodes get damaged. I have done some hard testing and so far no diodes have died because of the driver.
Cheers!
Last edited: