Maybe I'm just bad at searching but I spent most of the day trying to find an LED(s) and a driver(s) that will give me an output of ~1500-2000 lumens (building a dive light for scuba). Any advice? There just seems to be so many options it's hard to narrow down. I found a lot on dx.com, I've...
Thoughts on THIS heatsink for a 2W diode? At that price, I can't believe the included lens is worth a darn, but would it be replaceable with a higher quality lens? I'm thinking about doing a knife edge project... Think this would be a suitable housing for a few diodes?
Selling my 15W tube a̶n̶d̶ ̶p̶o̶w̶e̶r̶s̶u̶p̶p̶l̶y̶,̶ ̶a̶s̶k̶i̶n̶g̶ ̶$̶2̶5̶0̶ $100
The tube is fully functional (see pictures) and will be shipped in it's original factory packing.
It's not the tube- I borrowed a friend's hene psu and it worked (not ideal, but the beam turned on). Could be a blown fuse on my psu... I'll try and find some time to go back to the lab soon and check it. Pinout actually was labeled (just had to find the right viewing angle). Phenol's pinout...
So, I managed to get to the lab today to test it out. Ended up frying my fuse on the 110-220v transformer. Luckily, there was one at the lab I could use. I hooked it up and wasn't getting anything from the laser. My ammeter would occasionally read 0-1mA, but even turning the pot all the way to...
I figured, just like to double check- especially with high power/high cost/fragile devices :) Off to the store to get some distilled water for the cooling system, with any luck she'll be up and opperating tonight! :D
I just wired it up as Phenol's original diagram had, I'm using a 10K pot and it's only giving me a max of ~3kohms. As I rotate, it gets up to 3k, then goes back down to zero. Is this what should be happening?