---------------Off topic---------------
Please learn how to use "Multiquote".
---------------On topic----------------
I got this ~10 years ago and recently the diode died, I'm still looking for another.
Sorry for the quality of the images, I took them using my webcam.
Please use the edit button.
Remove the tail cap and try using a piece of wire to make the connection, try going through various sizes of wire, it may be that the resistance of the spring is influencing.
That's why there are expensive and cheap multimeters. :yh:
Even if the battery is not protected it can have some diodes, may be they're bad (If it has), let the multimeter for longer, see if it is oscillating. If possible test it with an LED and a multimeter between it (all positives together and all negatives together).
When the forum search does not help, use Google
type:
site:http://laserpointerforums.com/ what you want to search
If the lens is right, then just do as told in the topic I posted above
If you want, do the following:
Aim the laser as far as possible (without trying to focus), then adjust the...
They use the board and the spring (which is already soldered to it) and put together the LD driver with her, because the flashlight drivers are usually made to fit in the host, so the flashlight driver ends up serving as a support and connection between the LD driver and the host.
Your computer will not explode if you use the "Search". Ty.
http://laserpointerforums.com/f44/focusing-infinity-40470.html
If you still can not focus, could be that your lens is misaligned or not getting the necessary distance from the LD.
Get a soldering station (temperature control) and read a little about the basic care of the welder, for example:
-After use, clean the soldering tip (when you put it in the base) and clean again before using it again (when you remove it from the base), but NEVER clean the tip when you no longer...
So, I made the "Laser driver - It can be done" and it seems to work perfectly.
But when testing with the first diode that I have harvested (Quoted in the initial post) I managed to get it to run at 200mA but if I raise more I lose the "little" glow that I'm getting. With the lens I can create a...
DVD Player diodes works like a "normal" laser, do not burn anything.
Google "HOP-1200W" and see if your sleed look like this, if yes, the triangle-shaped pin is the red and the other that has the pins aligned and sink is the IR.
@Blord
I think there are diodes capable of producing two-wavelength.
Sony Global - Two-wavelength Laser Diodes for DVD Playback
@udanis
There is CR123 rechargeable or the rechargeable is only the RCR123?
--------------------
That's what I got searching the part number
CD/VCD: KSS-210A...
@udanis
All are with the sleds, some have stickers, I'll place it in google and see what pops up ...
I easily find a non-rechargeable CR123, but the rechargeable I think it will be very hard.
Just to clarify, I live in Brazil and most batteries used here are those of the 1.3v~1.5v and 9v...