- Joined
- Jul 8, 2012
- Messages
- 1,772
- Points
- 0
Does this work with every size of diode(specifically a 9mm)?
EDIT: I just realized the kryton I will be getting from the GB will be a pressfit design. Is the process any different?
This process will work with a 3.8mm, 5.6mm, and 9mm diodes but remember you need to get the appropriate sized press. Flaminpyro offers a press specific to each sized diode. For 9mm diodes you also need to make sure you remove the any optics and mounting brackets and clean up the diode before you press and the small red pin guard on some diodes can usually be left on during pressing.