jupiter8
0
- Joined
- Apr 28, 2010
- Messages
- 174
- Points
- 0
I was up late last night building myself a nice little test-load. As you know it's pretty simple stuff, put it all together with a switch to flick between 6x IN4001s and 4x IN4001s. I've got a nice convenient socket to plug the multi-meter leads into and aligator clips for hooking it up to the driver.
Well it's finished and the DAMN thing is giving me VERY strange numbers. It doesn't agree with my other test-loads and it's driving me NUTS! I checked all the joints, double checked the circuit. I'm too stupid to figure this out right now...
On the RED setting it's operating ok, but giving lower numbers than my basic red testload. It's when I flick the switch to BLURAY setting that things get weird.
Increasing the driver by 10mA then flicking to bluray here are the numbers... someone tell me I'm an idiot and point out what I can't see:
Well it's finished and the DAMN thing is giving me VERY strange numbers. It doesn't agree with my other test-loads and it's driving me NUTS! I checked all the joints, double checked the circuit. I'm too stupid to figure this out right now...
On the RED setting it's operating ok, but giving lower numbers than my basic red testload. It's when I flick the switch to BLURAY setting that things get weird.
Increasing the driver by 10mA then flicking to bluray here are the numbers... someone tell me I'm an idiot and point out what I can't see: