Photonz
0
- Joined
- Jun 20, 2013
- Messages
- 530
- Points
- 0
I recently got the parts for a PL450B build in a C6 Host and when I got everything put together and fired it up it had a fairly weak dot. Based on the power charts I've seen it should at LEAST output 100mW when running at 220mA. I'm using a 16.8mm round driver running at 220mA from survivallasers and a PL450B diode from DTR with a 3 element glass lens. I posted some pictures below of my setup and the dot on a white and black surface. Any ideas or help on what's going on would be greatly appreciated.:thanks:
Last edited: