- Joined
- Apr 23, 2015
- Messages
- 51
- Points
- 0
EDIT:
FWIW to anyone searching for compatibility, hope this helps:
- Although I can't verify this by physical examination. All the info obtained confirms that this unit uses the following batteries:
-- 16340*2
-- 18350*2
-- 18650*2 - You need to request the extension tube at time of purchase
#####
I'll be ordering a PL445-1600 from laserbtb pretty soon and I'm trying to figure out which batteries it supports, particularly 18650's. But also other members' opinions/experiences with other battery types too :yh:
I've looked through a few older threads, mainly these 2.
http://laserpointerforums.com/f65/laserbtb-com-source-all-laser-needs-6-109058640691-a-91816.html
http://laserpointerforums.com/f44/skylaser-pl445-battery-question-87829.html
It would appear they for sure support 16340's and 18350's. 18650's are also mentioned too.
Can anyone confirm if it supports 2x 18650?
Button top or flat top?
Does it need an extension for 18650 x 2?
** It's mentioned an extension tube is required for using 2 18650's
I'm mainly interested in 18650's since I vape and already have a bunch of good quality high drain IMR's laying around. Orbtronic SX30, Sony VTC5, and some Efest Purple 2600's.
I tried contacting laserbtb via the email address on their site but didn't get a reply yet :yabbem:
* My apologies for not introducing myself first.
FWIW to anyone searching for compatibility, hope this helps:
- Although I can't verify this by physical examination. All the info obtained confirms that this unit uses the following batteries:
-- 16340*2
-- 18350*2
-- 18650*2 - You need to request the extension tube at time of purchase
#####
I'll be ordering a PL445-1600 from laserbtb pretty soon and I'm trying to figure out which batteries it supports, particularly 18650's. But also other members' opinions/experiences with other battery types too :yh:
I've looked through a few older threads, mainly these 2.
http://laserpointerforums.com/f65/laserbtb-com-source-all-laser-needs-6-109058640691-a-91816.html
http://laserpointerforums.com/f44/skylaser-pl445-battery-question-87829.html
It would appear they for sure support 16340's and 18350's. 18650's are also mentioned too.
Can anyone confirm if it supports 2x 18650?
Button top or flat top?
Does it need an extension for 18650 x 2?
** It's mentioned an extension tube is required for using 2 18650's
I'm mainly interested in 18650's since I vape and already have a bunch of good quality high drain IMR's laying around. Orbtronic SX30, Sony VTC5, and some Efest Purple 2600's.
I tried contacting laserbtb via the email address on their site but didn't get a reply yet :yabbem:
* My apologies for not introducing myself first.
Last edited: