hello guys, i starting to create my first laser and i making it this way:
driver:
-http://cgi.ebay.com/Micro-Drive-Laser-Driver-rkcstr-30-440mA-/320620378732?pt=LH_DefaultDomain_0&hash=item4aa676ba6c
module:
-http://shop.ebay.com/items/?_nkw=650nm+5mW+laser+module+6mm+mini&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=
diodes:
-http://shop.ebay.com/items/?_nkw=200mw+laser+diode+650nm+Kip+Kay+project+suitable&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=&_fpos=&_fspt=1&_sadis=&LH_CAds=&satitle=200mw+laser+diode+650nm+kip+kay+project
-http://shop.ebay.com/items/?_nkw=150mw+blu+ray+diode&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=
now i have a few questions to complete this project:
-is any item missing in the listing for a succesful project?
-wich is the best diode for this project?
-will this laser work?
-if it works, will it work for a good period of time?
-will it burn stuff? :drool:
-do you recommend me to change any item i listed?
-if anyone here know a better (cheaper) project with red, blue or violet beam, that BURNS stuff eg, please post here?
Now the two only things i need to know to start creating my lasers on my own, how i know the best driver and module i will use, and anyone know any schematic that can send me so i can see where i put each piece?
Thanks a lot for everything you guys already did to me here in the other posts. :yh:
driver:
-http://cgi.ebay.com/Micro-Drive-Laser-Driver-rkcstr-30-440mA-/320620378732?pt=LH_DefaultDomain_0&hash=item4aa676ba6c
module:
-http://shop.ebay.com/items/?_nkw=650nm+5mW+laser+module+6mm+mini&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=
diodes:
-http://shop.ebay.com/items/?_nkw=200mw+laser+diode+650nm+Kip+Kay+project+suitable&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=&_fpos=&_fspt=1&_sadis=&LH_CAds=&satitle=200mw+laser+diode+650nm+kip+kay+project
-http://shop.ebay.com/items/?_nkw=150mw+blu+ray+diode&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=
now i have a few questions to complete this project:
-is any item missing in the listing for a succesful project?
-wich is the best diode for this project?
-will this laser work?
-if it works, will it work for a good period of time?
-will it burn stuff? :drool:
-do you recommend me to change any item i listed?
-if anyone here know a better (cheaper) project with red, blue or violet beam, that BURNS stuff eg, please post here?
Now the two only things i need to know to start creating my lasers on my own, how i know the best driver and module i will use, and anyone know any schematic that can send me so i can see where i put each piece?
Thanks a lot for everything you guys already did to me here in the other posts. :yh: