Mrcrouse
0
- Joined
- Jul 10, 2009
- Messages
- 1,476
- Points
- 63
I had some free time, and drew this up in Creo. Looks pretty sweet, but would be around $175 or so. I am only able to make 2 of them, so if you like it put your order in before it's too late! (I know it is a high price tag, but there is a lot of work that goes into this, and a lot of assembly and machining time.
Imagine this:
Coming of the front of this host:
For reference, the "barrels" are 3" long, and 1/4" wide. There are 12 of them around plates that are 2 3/8" wide. The center heatsink is 1 5/8" thick outside of the host, and widens inside.
(The back part of the heatsink pictured would be inside the host)(Can also be Original Mace of Doom host if preferred)
Imagine this:
Coming of the front of this host:
For reference, the "barrels" are 3" long, and 1/4" wide. There are 12 of them around plates that are 2 3/8" wide. The center heatsink is 1 5/8" thick outside of the host, and widens inside.
(The back part of the heatsink pictured would be inside the host)(Can also be Original Mace of Doom host if preferred)
Last edited: