- Joined
- Mar 30, 2008
- Messages
- 6,058
- Points
- 0
HEy all, I have a Cyonics Uniphase Argon that is not working properly. I have POURED over Sam's Laser FAQ's, and am in communications with Sam regarding this laser as well ! It was working perfectly fine until it was recently shipped to me It was not packed too well, and I am kinda stuck with the resultant non working Argon, and my little heart has been crushed
It fires - emits a tiny amount of approx 405nm light out of the aperture - the HR mirror is "fine" despite a small scuff on it - the head is lasing to a certain degree - both rings glow on the tube, and the before mentioned emissions. It is reading 10Amps at the test juncture of pins 26&27 on the jumpered test area on the P/S - but will not fire properly. Does ANYONE know of a place where I could send this laser (I REALLY want it fixed !) to get it looked at and repaired ? Sam is a huge help, but I don't know if he has the time to look at it - I would pay shipping both ways (with insurance, etc) and of course pay you for your time (provided it is semi-reasonable). PLEASE let me know if you know anyplace that is capable of repairing this exquisite laser !
It fires - emits a tiny amount of approx 405nm light out of the aperture - the HR mirror is "fine" despite a small scuff on it - the head is lasing to a certain degree - both rings glow on the tube, and the before mentioned emissions. It is reading 10Amps at the test juncture of pins 26&27 on the jumpered test area on the P/S - but will not fire properly. Does ANYONE know of a place where I could send this laser (I REALLY want it fixed !) to get it looked at and repaired ? Sam is a huge help, but I don't know if he has the time to look at it - I would pay shipping both ways (with insurance, etc) and of course pay you for your time (provided it is semi-reasonable). PLEASE let me know if you know anyplace that is capable of repairing this exquisite laser !