- Joined
- Oct 2, 2007
- Messages
- 5
- Points
- 0
I'm new to the forum and to making lasers. i bought the sony from here in the GB, i bought the Dorcy Metal Gear and the aixiz housing and 47uf 16v. every picture i see has the laser sticking out. what if i made a heat sink that was 1/2-1 inch longer and used the whole housing from the aixiz and not just the internals or the internal with a heat sink flush mounted. like the green laser points that cost like $500 i have seen a picture with a heat sink saying 3 min use with heat sink. looks mean noting i want to max my usage.
I'm thinking heat dissipation so i can run it longer then 30 sec. good idea or just get a heat sink that fit in the light housing?
if someone sells the heat sinks that fit the fit the Dorcy Metal Gear i'd buy them. i assume i need to have them custom made.
I'm thinking heat dissipation so i can run it longer then 30 sec. good idea or just get a heat sink that fit in the light housing?
if someone sells the heat sinks that fit the fit the Dorcy Metal Gear i'd buy them. i assume i need to have them custom made.