LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Community Focus Knob - Group Buy - 2 packs left
- Thread starter rhd
- Start date
rhd
0
- Joined
- Dec 7, 2010
- Messages
- 8,475
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two 
BH:
I love your design!
One note though, it would machine quite that way. The cutter is circular, and about 1.5mm. You'll loose a TON of the fine points. I think the inner circle will be too thin also (less than a mm in your design)
If you try the "price" analyze tool, it will end up highlighting in red everything that won't get machined properly. It's really useful.
Krogith:
I didn't entirely follow your request - can you explain it again?
Cheers
BH:
I love your design!
One note though, it would machine quite that way. The cutter is circular, and about 1.5mm. You'll loose a TON of the fine points. I think the inner circle will be too thin also (less than a mm in your design)
If you try the "price" analyze tool, it will end up highlighting in red everything that won't get machined properly. It's really useful.
Krogith:
I didn't entirely follow your request - can you explain it again?
Cheers
- Joined
- Dec 23, 2010
- Messages
- 561
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
AHH ben, thats some wicked sick designs...unfortunetly that would make these knobs cost quite a bit. and if you use the price analyzer function, it will tell you how small a tool you need to use to make the designs you chose. The tolerance for the machining would have to be like 0.05mm which will make the price skyrocket faster than apollo 13 man.
not to say i dont appreciate the hard work you are putting in. And that would be a nice one-off or custom type knob. But the replacement for the aixiz knobs wouldnt make sense if it ended up costing 10 bucks each... FP makes great knobs for a little more.
Oh btw did you run the program all the way through and get a price quote for that design, i might be interested in those if a GB could be organized for like 10 of them.
AHH ben, thats some wicked sick designs...unfortunetly that would make these knobs cost quite a bit. and if you use the price analyzer function, it will tell you how small a tool you need to use to make the designs you chose. The tolerance for the machining would have to be like 0.05mm which will make the price skyrocket faster than apollo 13 man.
not to say i dont appreciate the hard work you are putting in. And that would be a nice one-off or custom type knob. But the replacement for the aixiz knobs wouldnt make sense if it ended up costing 10 bucks each... FP makes great knobs for a little more.
Oh btw did you run the program all the way through and get a price quote for that design, i might be interested in those if a GB could be organized for like 10 of them.
rhd
0
- Joined
- Dec 7, 2010
- Messages
- 8,475
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
One other note - this CNC shop stops being able to machine aluminum with any bit size less than 1.5mm - so to be honest, I'm not even sure of the extent to which the detail on mine will be as good as presented.
One other note - this CNC shop stops being able to machine aluminum with any bit size less than 1.5mm - so to be honest, I'm not even sure of the extent to which the detail on mine will be as good as presented.
- Joined
- Dec 23, 2010
- Messages
- 561
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
ahh yess... rhd is absolutely correct. damn... that sucks monkey nuts... for a precision machine shop to be unable to cut smaller than 1.5mm. then again...its not easy i know.
ahh yess... rhd is absolutely correct. damn... that sucks monkey nuts... for a precision machine shop to be unable to cut smaller than 1.5mm. then again...its not easy i know.
Krogith
0
- Joined
- Dec 12, 2010
- Messages
- 1,195
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
I can;t draw so sorry, but thats a Idea I had
I'd have all the edges beveled
I like BH's as well, but Only if you can keep it Exact If you have to Change it for any reason it would loose it's "Flare"
I can;t draw so sorry, but thats a Idea I had
I'd have all the edges beveled
I like BH's as well, but Only if you can keep it Exact If you have to Change it for any reason it would loose it's "Flare"
Last edited:
rhd
0
- Joined
- Dec 7, 2010
- Messages
- 8,475
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
It would loose it's flare - in fact your design would too
Just to reiterate, some of these designs are REALLY cool and creative, but are beyond what we can (feasibly) get machined. Here's a visual explanation of what wouldn't work:
You can't do fine detail. In fact, my design is likely pushing the limits.
It would loose it's flare - in fact your design would too
Just to reiterate, some of these designs are REALLY cool and creative, but are beyond what we can (feasibly) get machined. Here's a visual explanation of what wouldn't work:
You can't do fine detail. In fact, my design is likely pushing the limits.
Attachments
Krogith
0
- Joined
- Dec 12, 2010
- Messages
- 1,195
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
rhd
0
- Joined
- Dec 7, 2010
- Messages
- 8,475
- Points
- 0
Krogith
0
- Joined
- Dec 12, 2010
- Messages
- 1,195
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
Will my new Idea Work?
Will my new Idea Work?
rhd
0
- Joined
- Dec 7, 2010
- Messages
- 8,475
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
Mostly - the three dots would end up making the side walls REALLY thin (like, less than half a mm thin) - which would likely be a problem.
Without those dots, it would be golden
You should fire up the software and give it a shot. I learned it (at least -to the extent of being able to make it work) in 2 hours, without previous CAD experience. It's really easy software.
Mostly - the three dots would end up making the side walls REALLY thin (like, less than half a mm thin) - which would likely be a problem.
Without those dots, it would be golden
You should fire up the software and give it a shot. I learned it (at least -to the extent of being able to make it work) in 2 hours, without previous CAD experience. It's really easy software.
Krogith
0
- Joined
- Dec 12, 2010
- Messages
- 1,195
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
Well It still might look good, I keep forgetting how small it is going to be
Well It still might look good, I keep forgetting how small it is going to be
jakeGT
0
- Joined
- Oct 29, 2010
- Messages
- 3,532
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
I like both of them, your newest and krogs newest design,
I'll take like 10 once we have the final design
I like both of them, your newest and krogs newest design,
I'll take like 10 once we have the final design
- Joined
- Dec 23, 2010
- Messages
- 561
- Points
- 0
Re: Community Focus Knob - Group Development / Group Buy - Take two
sorry krogith but my vote goes to rhd's latest design. simple yet elegant. very nice, while keeping good structure. Wouldnt want these to bend or break easy...though your "ninja star" design is awesome. maybe a batch of each? 100 of rhd's and 100 of krogiths... im going to say i will get 15 of these when this starts rollin
sorry krogith but my vote goes to rhd's latest design. simple yet elegant. very nice, while keeping good structure. Wouldnt want these to bend or break easy...though your "ninja star" design is awesome. maybe a batch of each? 100 of rhd's and 100 of krogiths... im going to say i will get 15 of these when this starts rollin
