The laser is a 400mW rated 532nm laser purchased direct from CNI. The model number is MGL-532-400. The average power is about 615mW according to the Thorlabs power meters at work, but actual measured power may differ slightly depending on the meter used to test it. The unit has analog modulation with 0-5V input. This input is needed to run the laser. I bought the laser to use in a scanner, but never got around to putting it together and have since lost interest in the project. I ran the laser for a few hours total to make sure it was in good order. The laser is TE cooled so it is fine to run for long periods of time. Here are a few pictures of it running. The second green is a 100mW for reference. I paid over $1400 after all the bank fees and shipping from China.
Here is a link to a video of it burning a few matches too: lasers :: MVI_0634.flv video by CourregesR - Photobucket
Here is a picture of the power meter after I tested it at work.:
Price for the laser is now $600 + shipping.
I might also be willing to do a partial trade for a 12X BR handheld set at roughly 500mW.
PM me with any questions and I'll answer them as best I can.
Here is a link to a video of it burning a few matches too: lasers :: MVI_0634.flv video by CourregesR - Photobucket
Here is a picture of the power meter after I tested it at work.:
Price for the laser is now $600 + shipping.
I might also be willing to do a partial trade for a 12X BR handheld set at roughly 500mW.
PM me with any questions and I'll answer them as best I can.
Last edited: