- Joined
- Dec 15, 2009
- Messages
- 234
- Points
- 0
WTB new or used 405-G-1 in normal aixiz lens assembly. Cant seem to find it anywhere.
WTB new or used 405-G-1 in normal aixiz lens assembly. Cant seem to find it anywhere.
Did, I thought he had an ebay page, Laser4u, but the lens isn't in an aixiz module... I was hoping thier was a used one somewhere:thinking:
u can press it into the back of aixiz modul with a vice
u can take the 405 g1 modul that laser4u sells, and press it into the back of the aixiz modul so it will fit the heatsink. cheaper that way, and works the same
Not sure I follow you...
u can take the 405 g1 modul that laser4u sells, and press it into the back of the aixiz modul so it will fit the heatsink. cheaper that way, and works the same
There is a work around for this. The module will "press fit" inside the AixiZ module back. Cut off the rear of an AixiZ to length so it is open at both ends and the same length as the Lasers4you module. Use a little thermal paste and press the module into the shortened rear of the AixiZ. The AixiZ acts as an adapter "sleeve." It will now fit into any of Jay's heat sinks made for the AixiZ that you already may have.
The length is still a minor issue with this technique
Peace,
dave
What are you refering to as a 405 g1 modul??
I'm not trying to be mean, I just don't understand what you are refering to.
Huh??
He is looking for a 405-g-1 lens in an aixiz module. NOT a diode, heatsink or any other part. Just an aixiz module with a 405-g1 lens already in it.
What are you refering to as a 405 g1 modul??
Specifically what he is looking for is a G-1 that is threaded for an aixiz module. The laser he has already has an aixiz module in it. He has a G-1 and by what he told me it is in a nut threaded for a Meridith module if I took him correctly. And if this is the case I believe Jay can sell just the nut threaded for aixiz and he can just swap the actual glass out of the old nut into the new one.