Exerd
0
- Joined
- Jan 2, 2010
- Messages
- 448
- Points
- 28
Last night I put an Aixiz module on the lathe and opened it to accept 9mm diodes.
I'm trying to collimate the 808nm IR light, and I'm not exactly sure what optics will be required. The diode does not have FAC. I tried a 405-G-1 lens I had laying around, just to see if it had any effect, and no, it did not collimate whatsoever.
Is there any collimation solution for 808nm light which will thread into the Aixiz module? If so, I need to order it up.
Here is a photo showing it next to a standard 5.6mm mounted diode:
I'm trying to collimate the 808nm IR light, and I'm not exactly sure what optics will be required. The diode does not have FAC. I tried a 405-G-1 lens I had laying around, just to see if it had any effect, and no, it did not collimate whatsoever.
Is there any collimation solution for 808nm light which will thread into the Aixiz module? If so, I need to order it up.
Here is a photo showing it next to a standard 5.6mm mounted diode: