   |
| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
01-08-2010, 05:07 AM
| #1 |
| Class 4 Laser  Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428   |  FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts... This 'Hot' option Phaser Kit and/or parts, are specifically for my Star Trek Phaser mod... (445, green, blu-ray, or red) Note: I do not sell complete lasers. My kits do not include diodes or modules. You must buy your own laser diode and/or green laser module to complete the assembly. ('Hot' option means 'driver installed and current set', safety switch, LED, heatsink, EzFocus adapter, and everything built - but no laser diode included) I do offer a 'Hot' option build that is complete with safety switch, LED, FlexDrive installed... Heatsink set and aligned, EzFocus adapter, and 405-G-1... (laser diode not included) See 'Hot' option below... Send me a PM!  12X Blu-Ray Star Trek Phaser video! Click here!  And another... 12X Beam Video (with smoke) Igniting flash paper and popping more balloons! - Click here!  Proper eye protection needed: Just a warning. (In case you may be a beginner) Read up on proper eye protection... AixiZ module: You will not use the back 'barrel' part of the AixiZ module. All that is needed with any decent heatsink, is the front 'business end' of the module. For a 445 build, you can get your diode pre-installed into an AixiZ module with lead wires soldered on from daguin or DTR. In that case, you will just connect your diode leads, to my driver leads... ('Hot' option kit) 1.5 Amp 445 build: (see pricing for the 1.5 Amp build below) Shown in the July, 2011 issue of Popular Science Magazine... Popular Science Phaser Article...  These parts are for the Playmates brand, 1994 Classic Star Trek Phaser... (stock #6118)    Copper heatsink option - $12 dollar upgrade...    12X Star Trek Phaser tutorial is here! Using a FlexDrive for my 12X Blu-ray Star Trek Phaser build: http://hacylon.case.edu/ebay/laser_d..._FlexDrive.php   Green Star Trek Phaser tutorial is here! Here are some custom parts that I will offer if you would like to follow my tutorial for this Star Trek Phaser modification... About the cone tipped EzFocus adapter. Please realize that there is a lot of work involved in making this piece. That is why I am asking the price shown. * Three different size drilling operations * Then a reamer to size for lens thread tapping * Tap the threads for the lens, lined up on the lathe for perfect alignment * A lot of shaving down on both ends for the shaft and the cone * Then the knurling... after the sizing of the knob and the skirt which fits the cap. (see pictures and tutorial link above)  * And finally, the angle cut for the cone, and putting a nice sanded finish on it If you do this build, and get this EzFocus adapter, you will not be disappointed. It is perfect... * Heatsink - $23 (or $12 dollars more for the copper heatsink) - Fit for either build. The set screw location is the only difference, * 'Cone tipped' EzFocus adapter - $55 Add one of my custom glass lens mods! * 405-G-1 glass lens mod - $55 (31% more power for blu-ray vs AixiZ acrylic) * 650-G-1 glass lens mod - $52 (25% more power for red vs AixiZ acrylic) * Shipping - Based on my PayPal fees and postage (send message for ordering) * Please read my shipping policy here! P.S. I have a few of the Phasers, and I would do a 'Hot' option kit, but would not include the diode. You would have to get your own diode to turn it into a laser... Send me a PM if you are interested!  If you look at the tutorials, you will see that in both builds, there is a drilling operation for the nose... * For the green, I drill a 9/64" hole straight through the stock cone. * For the 12X, I drill the nose cap to fit my custom EzFocus adapter. So if you would like, then you can send me your nose cap, and I can also do the drilling at no additional charge. Also, in the 12X tutorial, I show a safety switch option. The switches I stock, are for my 'Hot' option kits, but if you plan on doing it the way I show it, you can also send me your sound knob, and I can drill it through, and fit it with a fiber optic plug as shown in my tutorial for an extra $5 bucks. But you would get your own 3mm LED for it. First make sure you will have the proper type of switch for this set up...   12X Blu-Ray Star Trek Phaser video! - Click here! (for best view) 'Hot' Option Build: Here is all the information... (save for future reference) The most complete build I could do for you is to set up the phaser with everything except for the laser diode. Important: For those who are new to lasers, this modification can damage the eye instantly with a direct shot or reflection. Proper eye protection for 405nm wave length is recommended. And extreme caution needed when using. I would recommend storing it in a lockable case so that it cannot be accessed by just any person or child... Eye Protection: (405nm) http://oemlasersystems.com/product-catalog/laser-eye-protection/uv-visible/arg-uv-blu-ray-argon-blue-ktp So here's the deal... Proper eye protection for 405nm is recommended. Which is why I cannot sell it complete. (FDA) Only the non-laser parts. I don't sell complete lasers because of FDA regulations. So the most complete build I could do for you is to set up the phaser with everything except for the laser diode. I could even have the driver mounted and current pre-set. I could have the heatsink installed and adjusted too. All you would have to do, is get a diode, and mount it into an AixiZ module, solder lead wires to your diode pins, slip it into my heatsink, tighten the set screw, and solder your lead wires to my driver lead wires. I would call that a 'Hot' option kit. (driver installed) But it would still not be a cheap project. Sorry, but the parts add up. I would want: * Heatsink - $23 (add $12 for copper upgrade) * EzFocus adapter - $55 * AixiZ module - $5 * 405-G-1 glass lens - $55 * Phaser - $50 (or send me your phaser – 1994 Playmates brand, stock #6118) * Parts - Driver, switch, LED, wire, etc... - $40 (driver alone is $26) * Labor to do the modifications on the Phaser. And modify the trigger switch, wire and mount the safety switch and LED, fit the heatsink and install the driver. - $100 * Shipping - Based on my PayPal fees and shipping cost. (send private message) Out of U.S. buyers will assume responsibility. But there should be no problem. I would mark the package as a gift, with a description of 'Star Trek Toy', and a low value of $15 dollars. Anyway, as you can see, it is not cheap. The time involved is this modification, not counting the machine work for the heatsink and EzFocus adapter (which is the most technical part), is at a minimum of 3 or 4 hours... Parts options: The parts add up too. Especially if you want to build a 12X power like the one I show in my video with the safety switch and everything... You can get a PHR diode for $15 dollars and have about 130mW's. (405-G-1 glass lens) http://www.modwerx.com http://www.hightechdealz.com Your overall cost for a phaser build will depend on your choice of which laser diode to use: * PHR diode - $12 (about 110mW’s with AixiZ acrylic, or 140mW’s with my 405-G-1 glass lens) * GGW 6X diode - $60 (about 180mW’s with AixiZ acrylic, or 226mW’s with my 405-G-1 glass lens) * 12X diode - $60 (470+mW’s with my 405-G-1 glass lens) * 445 diode - $50 (1.5 Amp 'Hot' option available - see below) You need to use a glass lens for 12X power. An acrylic lens will degrade quickly. Here’s information about my 405-G-1 glass lens modification: (31% increase in power for blu-ray vs AixiZ acrylic) [URL="http://laserpointerforums.com/f64/fs-405-g-1-glass-lens-mod-31-increase-vs-aixiz-22497.html"]http://laserpointerforums.com/f64/fs-405-g-1-glass-lens-mod-31-increase-vs-aixiz-22497.html The 12X is what I showed in my video - 465mW's. (current is set at 320mA's) For that, you would have to buy a Pioneer BDR-205 drive, and harvest the diode yourself. 12X diode harvest and pressing into AixiZ module video: If you were to follow my tutorial, I have detailed pictures of the build and wiring here: Tutorial: 12X Star Trek Phaser Mod! There you will see exactly which phaser to buy, and there is a link to the driver. (FlexDrive) The FlexDrive is very small, and requires an understanding of how it works. There are range settings that can be soldered. See the documentation here: (for a 12X build, you want the 4th range setting - 155 to 600) http://hacylon.case.edu/ebay/laser_d..._V5_manual.pdf The FlexDrive will get damaged if you power it with out a load. You also will need a proper test load to set the current. See this write up for how to set current using a test load: (he shows a DDL driver, but it is the same procedure with a FlexDrive) It can be done - Laser driver * If you decide you would like a 'Hot' option kit, which is everything except the diode, then I can make that for you. * If you decide that you just need the heatsink, EzFocus adapter, and 405-G-1 glass lens, then I can make them for you. (405-G-1 needed for this power) But I don't sell the switches and other parts unless I am building a 'Hot' option kit... Keep this information for future reference! One thing if you get the 'Hot' option kit from me... I know that the FlexDrive and everything will be perfect. It will be tested and set at 320mA's. I have set over 500 FlexDrives. I just want to mention this because it is an electronic component that can be damaged if misused, and I will not be responsible. If you carefully read my instructions that will be included, I'm sure you will be fine. The worst thing you will do is maybe kill your diode. But the driver can be damaged if powered without a load. So watch out for that. I have put warnings in the instruction sheet that I will include... Even if it is powered for a split second without a load and doesn't harm the driver, it could still be a really bad thing. Because the capacitor in the driver would charge, and then it will kill your diode as soon as you try to connect it. I will make sure that the driver cap is discharged after I test it and set the current... With the 'Hot' option kit, I would like to take my time with it, and get everything perfect. (like 2 or 3 days) You would need to get your diode pressed into the AixiZ module, solder two 'fine' lead wires onto the diode pins, and complete the assembly... Diodes are sensitive to ESD, and can also be damaged with too much heat during soldering. I would recommend practicing on a cheap diode such as a PHR for harvesting and soldering if you have not already done this kind of thing. Cheap PHR diodes can be purchased at modwerx.com and hightechdealz.com (buy the complete 'sled') Here is the diode pin connections:  Assembly of the Phaser: The one area that you need to be careful about, is threading the lens in place. The lens will be installed into the end of my EzFocus adapter, which must be installed last. After the nose cap of the phaser is screwed on. So if you are not careful, you could cross thread the lens. But if you are careful, you will not have a problem. I will have it aligned already with the heatsink. Because I will have the heatsink glued in place (on one side of the model, so that you obviously can take it apart to install your diode), and when I glue it in place with silicone glue, I will have it dry with the lens and EzFocus adapter already installed. This will automatically align the heatsink with the lens and EzFocus adapter. Also, it will align it with the phaser. The beam will then come out perfectly centered and aligned. As long as the diode is pressed in properly into your AixiZ module... Here is a picture of the sled, and the location of the blu-ray diode: (Pioneer BDR-205 drive)  1.5 Amp 445 build: I have done testing with running 2 X IMR 14500 Li-Ion's in parallel and it works great for a V5 FlexDrive set at 1.5 Amps... It requires a few additional modifications: * Re-wiring it for parallel * Slight modification to the battery compartment * Driver heatsink installed * Installing voltage regulators for the sound board and the 3 volt LED 'armed' indicator LED. (7833 voltage regulators - 3.3 volts) * Also, with this mod, the sound board is turned on with the safety switch, as well as the laser... It is wired so that the voltage to the FlexDrive, is direct from the batteries. (4.2 volts at full charge) * 2 X IMR 14500 in parallel = 1200mAh's capacity * 2 X AW protected 14500's in parallel = 1500mAh's capacity I've also got an extra LED inside. So that blue light is illuminated out of the top of the vent plate when you activate the trigger...   With a 'Hot' option kit, the heatsink for the module is installed, and glued in place. It has to be that way because I align it with the EzFocus adapter, and the nozzle of the phaser. All you have to do, is slide your diode/AixiZ module into the heatsink and set it's position with the set screw. (you will need a 1.5mm Hex wrench) Then just solder your diode leads, to my driver leads, and that's it... The IMR 14500 Li-Ion batteries must be installed with both positive ends the same direction. I have permanent marker on the battery compartment to remind you of the battery install direction. With this build, I include the IMR 14500's. Because I need them to do the fitting, and also for the testing... Note: With a little extra work to modify the battery compartment, I can fit protected AW 14500's. Do not install the batteries until you get your diode connected. Because the driver can get damaged if powered without a load. The capacity will be approximately 1200mAh's (IMR 14500's - 1500mAh's for protected AW 14500's). So you must be careful not to over discharge the Li-Ion batteries. It will be around 30 to 40 minutes between charges. Check voltage once in a while. Do not let the batteries get below 3 volts. Pricing: * Heatsink - $23 * Copper heatsink upgrade - $12 * EzFocus adapter - $55 * AixiZ 445 lens - $11 * AixiZ module - $5 (I like to sell the module with the kit, because I install and align the heatsink using the module) * Phaser - $50 (Playmates brand, stock #6118) * Parts - Driver, switch, LED, 2 X 3 volt regulators, wire, etc... - $55 * V5 FlexDrive 'Hot' option set at 1500mA's with driver heatsink, custom wiring for 2 X Li-Ion's in parallel, 3 volt regulator for LED's and sound board - Labor to modify the trigger switch, wire and mount the safety switch and LED, fit the heatsink and install the driver. - $145 * 2 X IMR 14500 Li-Ion batteries - $20 * Shipping (U.S.A.) - $29 (based on PayPal fees plus Priority shipping with delivery confirmation) Total - $405 dollars. Reminder: With this build, the sound will not work until you arm the laser with the safety switch. Then the sound will work, along with the laser...
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too!  Last edited by jayrob; 08-30-2011 at 04:57 PM. |
|  |
|
01-08-2010, 10:42 PM
| #2 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 |  Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
01-20-2010, 09:25 PM
| #3 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
faircloth, I am sending your 'Hot' option phaser kit and other items today. (Wednesday) Hope your build goes well!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
01-22-2010, 01:36 AM
| #4 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
Tkienitz, I sent your 'Hot' option phaser kit and other items today. (Thursday) schuh, I have yours ready too, sending tomorrow... Hope you guys like them!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
01-27-2010, 11:20 PM
| #5 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
Kaiser, I am sending your Phaser parts today. (Wednesday) Post back with pictures when you do your build!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
01-29-2010, 11:12 PM
| #6 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
02-01-2010, 07:12 PM
| #7 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
02-02-2010, 11:47 PM
| #8 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
02-03-2010, 07:37 PM
| #9 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
Kosh68, I am sending your 'Hot' option Phaser back today. (Wednesday) Hope your build goes well! Please post back!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
02-05-2010, 08:59 PM
| #10 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
02-18-2010, 09:37 PM
| #11 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Heatsinks and EzFocus Adapter!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
03-09-2010, 11:32 PM
| #12 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
03-26-2010, 11:42 PM
| #13 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
04-05-2010, 11:10 PM
| #14 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
04-09-2010, 10:34 PM
| #15 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
04-28-2010, 12:39 AM
| #16 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
Freedom10, I sent your 'Hot' option Phaser kit with 405-G-1 glass lens today. (Tuesday) Hope you like it! Please post back with your comments...
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! Last edited by jayrob; 04-28-2010 at 12:45 AM. |
|
| |
|
04-29-2010, 10:24 PM
| #17 | |
| Junior Member Join Date: Apr 2010
Posts: 2
Rep Power: 0 |  Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts... Quote:
 What an awesome laser! I lit a few matches in the garage with it and blew them out quickly to get a little smoke going. I flipped off the lights and fired the beam against the opposite wall. Beautiful violet beam just like your video!  Jay, the kit was excellent and your machine work and alignment of the EZ Focus adapter was spot on. The beam fired out perfectly parallel with the body of the phaser. Nice job!!  I have to admit I was a bit nervous about harvesting the 12x Blu Ray for a first build. I kept thinking "one small mistake and "poof", b-bye $200."  But after spending several hours reading through the threads and watching YouTube videos on how to harvest the diode, it wasn't really that difficult. I just took my time, used a ground strap on my wrist, and used a small alligator clip on the diode leads to serve as a heat sink when I soldered the wires on. The hardest part was pressing the diode into the AixiZ mount. I didn't have a vice, so I used a pair of vice grips, wrapped tape around the jaws, and nudged the diode in a bit at a time until it was flush.Thanks again Jay for a great build! Off to go buy some flash paper and black balloons........ | |
| |
|
04-30-2010, 03:04 PM
| #18 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
Glad you like it! And thanks for posting back... I haven't gotten any feedback here because most of the people who have tried my 'Hot' option Phaser kit are not on LPF. Here a couple of good testimonials via e-mail: "I have to say that the build on this was excellent. All of the components worked perfectly, the custom-machined parts fit together with no problems, and the installation of the diode was well documented and easy to do. All of the solder points were very professionally done and everything worked as advertised. With the full build, it was as easy as soldering two wires to the diode, installing that into the heatsink, soldering those two wires to the leads, and putting everything back together. My time spent was roughly 30 minutes including removing the diode from the blu-ray device. After the build, I've used the phaser a number of times and it has never had an issue with overheating or failing for any reason. As Jay would say repeatedly (and correctly), protective eyewear is a must. Overall, for the high quality, this is one of the best values I've seen. Jeremy" "Hi, I purchased the “hot option kit” from Jay Robertson and am very happy with the quality of his work. His detailed instructions made it easy to install the diode needed to complete the build and now I have the totally cool working phaser that I dreamed of having ever since I was a kid. Communication with Jay was prompt and the delivery was fast and he was always willing to answer questions. I am very satisfied with my purchase and it’s super fun with flash paper too Sincerely, Tim Kienitz"
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! Last edited by jayrob; 04-30-2010 at 03:06 PM. |
|
| |
|
05-05-2010, 10:19 PM
| #19 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
05-07-2010, 02:29 AM
| #20 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
Kittnz, I sent your 'Hot' option Phaser kit with other parts today. (Thursday) I have the new Micro Boost driver installed and set at 400mA's per our conversation. You are the first to try the kit with the copper heatsink...  The Green Phaser heatsink and other parts are included in the package. Hope your 12X build goes well, and please post back with the results!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
05-10-2010, 11:27 PM
| #21 |
| Junior Member Join Date: May 2010
Posts: 3
Rep Power: 0 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts... |
|
| |
|
05-12-2010, 12:09 AM
| #22 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
Glad you like it! Thanks for posting back!  prosteve69, I sent your Phaser nose cap, EzFocus adapter, and heatsink today. (Tuesday) Hope your build goes well!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
05-14-2010, 06:07 AM
| #23 | |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts... Quote:
Hope you like it as much as the 12X kit!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! | |
|
| |
|
05-20-2010, 10:10 AM
| #24 |
| Junior Member Join Date: May 2010
Posts: 3
Rep Power: 0 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts... |
|
| |
|
06-02-2010, 11:12 PM
| #25 |
| Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,446
Rep Power: 428 | Re: FS: Star Trek Phaser Parts! 'Hot' Option Available! Or, Individual Parts...
Glad you like it! Beam shots welcome! Roosa, I am sending your 'Hot' option Phaser kit with copper heatsink today. (Wednesday) Set at 350mA's for longevity as we discussed... Hope your 12X build goes well!
__________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too! |
|
| |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
