- Joined
- Feb 19, 2009
- Messages
- 879
- Points
- 18
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
where do you guys buy your lens mounts for your scanners?
- Thread starter mattmagic100
- Start date
- Joined
- Oct 27, 2008
- Messages
- 726
- Points
- 0
Hey Matt,
You should read this thread: http://laserpointerforums.com/f47/first-laser-scanner-41973-4.html
Maybe from post 85 on. There is a lot on the soundcard dac. I totally didnt understand it but EF/Things helped me out to understand it. I posted pics of mine and where i soldered them and the pinouts of every single one. Feel free to post on that thread too. I am working on a RGY myself...
You should read this thread: http://laserpointerforums.com/f47/first-laser-scanner-41973-4.html
Maybe from post 85 on. There is a lot on the soundcard dac. I totally didnt understand it but EF/Things helped me out to understand it. I posted pics of mine and where i soldered them and the pinouts of every single one. Feel free to post on that thread too. I am working on a RGY myself...
- Joined
- Feb 19, 2009
- Messages
- 879
- Points
- 18
ok great thanks a lot =]]
and congrats i hope u do good cuz this stuff is really hard
and congrats i hope u do good cuz this stuff is really hard
- Joined
- Oct 27, 2008
- Messages
- 726
- Points
- 0
Thankyou! If you have any questions feel free to ask them. I will TRY to help...I am still a noob at this...
Do you need a box? I had a couple ideas...
Do you need a box? I had a couple ideas...
- Joined
- Feb 19, 2009
- Messages
- 879
- Points
- 18
haha yes please. i cant seem to find the right box.
also, if you know, can you tell me exactly what i need and everything i need. think i can name some of them to go with the whole thing.
100mW green from o-like- Industrial TTL Green laser Module 100mW w/TEC£>5¡«500mW green laser module£>Laser&lighting products£>www.0-like.com
SP20k's- SCANLSP-20 20k Scanner Laser Show Galvo for DPSS Argon - eBay (item 350235374155 end time Sep-02-09 03:43:16 PDT)
laserboy correction amp from dr.lava- http://hacylon.case.edu/ebay/laser_diode/LaserBoy_Correction_Amp.php
sound card from DX- DealExtreme: $21.60 C-Media CM106 USB 2.0 External Sound Card Box with 7.1-Speaker SPDIF Optical Output
does all this go together? and do all the wires come with everything?
the only trouble im having is understanding what a DMX is and what its used for and where everything gets plugged into.
also, if you know, can you tell me exactly what i need and everything i need. think i can name some of them to go with the whole thing.
100mW green from o-like- Industrial TTL Green laser Module 100mW w/TEC£>5¡«500mW green laser module£>Laser&lighting products£>www.0-like.com
SP20k's- SCANLSP-20 20k Scanner Laser Show Galvo for DPSS Argon - eBay (item 350235374155 end time Sep-02-09 03:43:16 PDT)
laserboy correction amp from dr.lava- http://hacylon.case.edu/ebay/laser_diode/LaserBoy_Correction_Amp.php
sound card from DX- DealExtreme: $21.60 C-Media CM106 USB 2.0 External Sound Card Box with 7.1-Speaker SPDIF Optical Output
does all this go together? and do all the wires come with everything?
the only trouble im having is understanding what a DMX is and what its used for and where everything gets plugged into.
- Joined
- Feb 19, 2009
- Messages
- 879
- Points
- 18
also i dont know where to get a PSU..........=/
- Joined
- Oct 27, 2008
- Messages
- 726
- Points
- 0
Ill get you some links. Basically a DMX is a box. It has pre-programmed patterns that it can play. Sometimes it has a mic for a "sound activation". (syncing the show to songs..). A DAC is a digital to analogue converter. Basically the gateway between your computer and your scanner. If you make a show in spaghetti you will NOT be able to play it with a DMX. You will need a dac for this.
I strongly suggest you read these thread. I was TOTALLY new to scanners but i started to learn more and more. Ill give you a list of threads:
1) http://laserpointerforums.com/f47/new-scanners-32674.html
2) http://laserpointerforums.com/f47/first-laser-scanner-41973.html
3) http://laserpointerforums.com/f47/first-scanner-advice-needed-right-step-into-scanners-42089.html
Do you just want a monochrome scanner? Or do you want to make a RGY/RGV/RGB? I will be using that green aswell...
PSU's come with whatever you buy(SP20's come with a psu, laser comes with a psu, if you chose to make a red then your flexmod would be your psu, ect.)
keep asking questions. It makes more sense to me when i explain it. The best way to learn is to teach it
I strongly suggest you read these thread. I was TOTALLY new to scanners but i started to learn more and more. Ill give you a list of threads:
1) http://laserpointerforums.com/f47/new-scanners-32674.html
2) http://laserpointerforums.com/f47/first-laser-scanner-41973.html
3) http://laserpointerforums.com/f47/first-scanner-advice-needed-right-step-into-scanners-42089.html
Do you just want a monochrome scanner? Or do you want to make a RGY/RGV/RGB? I will be using that green aswell...
PSU's come with whatever you buy(SP20's come with a psu, laser comes with a psu, if you chose to make a red then your flexmod would be your psu, ect.)
keep asking questions. It makes more sense to me when i explain it. The best way to learn is to teach it
Last edited:
- Joined
- Feb 19, 2009
- Messages
- 879
- Points
- 18
haha k i see. i read all those threads and im understanding a lot. the only reason im askin a lot of these questions is to make sure im right cuz if i screw this up i screw everything up. and ya its gonna be a monochrome scanner. just green.
so if i use the sound card from DX and and and the laser correc. amp from dr.lava i wont need a DMX?
so if i use the sound card from DX and and and the laser correc. amp from dr.lava i wont need a DMX?
- Joined
- Feb 19, 2009
- Messages
- 879
- Points
- 18
bump =D
- Joined
- Nov 7, 2008
- Messages
- 5,725
- Points
- 0
^That's correct. If you have PC control, DMX is inferior and not needed.
- Joined
- Oct 27, 2008
- Messages
- 726
- Points
- 0
That's correct(beat me to it elektro!). You will need to tune the AMP. Refer to my thread to do that. It also has all of the connections.
Also, mind if i ask a quick question? To anyone that has used spaghetti: Are there pre-set beam show designs or can you "draw" them in? Also i may need some advice on how to make shows (like what shapes to make for which parts of the songs ect.). I would like suggestions when i start making shows. I will post the shows in the multimedia section.
Also, mind if i ask a quick question? To anyone that has used spaghetti: Are there pre-set beam show designs or can you "draw" them in? Also i may need some advice on how to make shows (like what shapes to make for which parts of the songs ect.). I would like suggestions when i start making shows. I will post the shows in the multimedia section.
- Joined
- Nov 7, 2008
- Messages
- 5,725
- Points
- 0
Regarding your spaghetti question: Spaghetti is meant to allow you to create custom shows using existing .ild files (you already know where to find those). Spaghetti takes a multi-layered approach to show construction. Lets say, for example, you want to make a frame that contains a circle with a line across it. You have two .ild files, one with a line and one with a circle. If you place the circle on one layer and the line on another layer, the output will be a circle with a line through it. Using this method you can combine .ild files to get frames containing multiple aspects.
As far as creating your own .ild files from graphics you have around, there is other software that you can use for this. I believe that if you download the demo of Mamba Black that it comes with a full version of Mamba's frame-creation software. When you install the demo, it installs the frame creation software on the side. I haven't tried this personally, but I was told it works.
As far as creating your own .ild files from graphics you have around, there is other software that you can use for this. I believe that if you download the demo of Mamba Black that it comes with a full version of Mamba's frame-creation software. When you install the demo, it installs the frame creation software on the side. I haven't tried this personally, but I was told it works.
Last edited:
- Joined
- Feb 19, 2009
- Messages
- 879
- Points
- 18
okay awesome!
and nah its fine, ask away! =P
haha
so ur thread shows all the connections??
what page?
and nah its fine, ask away! =P
haha
so ur thread shows all the connections??
what page?
- Joined
- Oct 27, 2008
- Messages
- 726
- Points
- 0
http://laserpointerforums.com/f47/first-laser-scanner-41973-4.html
Post 85 on or so...The thread also has a lot of other info in it. You might as well read it if you dont have anything else to do...
Alright elektro...I can find those files in the spaghetti section of that website?
EDIT: post 600
Post 85 on or so...The thread also has a lot of other info in it. You might as well read it if you dont have anything else to do...
Alright elektro...I can find those files in the spaghetti section of that website?
EDIT: post 600
- Joined
- Feb 19, 2009
- Messages
- 879
- Points
- 18
haha k thanks!
have u started buildin ur scanner yet?
have u started buildin ur scanner yet?
- Joined
- Oct 27, 2008
- Messages
- 726
- Points
- 0
I am actually on vacation right now...Plus it is my b-day on friday so i will get some money to fund my project. I Think my project will be a "work-in-progress" for a couple months. I will be using it for my "bedroom rave" lol. It will basically be the components on a piece of wood or something similar. No box or anything. I will only be running it for ~25 minutes max.
I may have to heatsink the red a little more for runtime like that without an aluminum slab. What do you think elektro? I have one of those heatsinks that i think they use for TEC's. It has a 12v DC fan attached to the end of the heatsink...Could i just place this on top of the other heatsink with thermal compound inbetween the big heatsink and the little heatsink?
I may get the other set of scanners you pointed out. 180 shipped for sp20's is pretty good. I found another set called "CW20's". They were 140 shipped. The person selling said they would perform at 20k at 8 degrees optical angle...How do the sp's compare?
I may have to heatsink the red a little more for runtime like that without an aluminum slab. What do you think elektro? I have one of those heatsinks that i think they use for TEC's. It has a 12v DC fan attached to the end of the heatsink...Could i just place this on top of the other heatsink with thermal compound inbetween the big heatsink and the little heatsink?
I may get the other set of scanners you pointed out. 180 shipped for sp20's is pretty good. I found another set called "CW20's". They were 140 shipped. The person selling said they would perform at 20k at 8 degrees optical angle...How do the sp's compare?
