Qumefox's FOR SALE thread. Hosts, lenses, etc.

Since this thread still exists, I might as well make use of it. Since I haven't really been involved in this hobby in a good decade, I finally went through all the remaining laser stuff I have, and it's now up for auction as a lot on ebay as I need to get rid of stuff.

Listing can be found here: https://www.ebay.com/itm/157296748851

What's included in the lot:

Working lasers:
170mw 650nm (I think) in sipik hk21 host
11mw 532nm 1x 18650 host
33mw 532nm 1x 18650 host
68mw 532bn 1x 18650 host
The following are a matched set:
52mw 401nm 1x AAA stainless steel host (uses 10440 li-ion)
36mw 413nm 1x AAA stainless steel host (uses 10440 li-ion)
40mw 445nm 1x AAA stainless steel host (uses 10440 li-ion)
10mw 512nm 1x AAA stainless steel host (uses 10440 li-ion)
7mw 532nm 1x AAA stainless steel host (uses 10280 li-ion)
16mw 637nm 1x AAA stainless steel host (uses 10440 li-ion)
35mw 658nm 1x AAA stainless steel host (uses 10440 li-ion)

Modules:
80mw 3V 650nm module
650nm diode in heatsink. Unknown max power output but worked when tested on bench psu
18mw 3V 532nm module
15mw 3V 532nm module
2x 532nm modules without driver. Unknown max power output but work when tested on bench psu
2x 405nm modules without driver. Unknown max power output but work when tested on bench psu

Diodes:
450nm diode in aixiz module. Unknown max power output but work when tested on bench psu
685nm diode in aixiz module. Unknown max power output but work when tested on bench psu
445nm diode. likely 1-1.2W going by available diodes back when this was purchased
3x 405nm diodes, 1 raw, 2 in aixiz modules. Unknown max power output but work when tested on bench psu
2x 635nm diodes, one in aixiz module. Labeled as 300mw but i'm not sure I trust that.
7x "red" diodes. Hard for me to tell by eye what exactly these are but they're all brand new diodes. 3x "might" be 685nm but they all could be 650nm too. Unknown max power output but work when tested on bench psu

Drivers:
1x micro boost driver
1x micro flexdrive driver
2x flexmod p3 drivers

Hosts: (ready for diodes/drivers)
7x sipik hk21 1x 18650 hosts with focus rings, aixiz module, tripod, and alumium heatsink
1x tank007 1x 18650 host with aixiz module, focus ring, tripod, and copper heatsink

Optics:
17x 445nm AR coated 3 element lenses
27 acrylic lenses
50x 650nm AR coated acrylic lenses
4x 650nm AR coated 3 element lenses
cylkit-01 corrective lens set for 445nm multimode diodes
3x3x4.5cm prism
5x 13x13mm IR filters
32x misc small lenses. 4-7mm
6x small dichroic mirrors <8mm
10x assorted lenses on mounts
4x 8x10mm front surface mirrors on mounts
4x 12x12mm dichroic mirrors - reflects green/red
2x 12x37mm dichroic beam splitters - reflects green/red, passes blue

Misc:
RIYA Lite DAC USB laser projector controller
30Kpps galvo set with drivers and PSU
laserbee I LPM
ophir 20A-SLT LPM head
12x complete aixiz modules
bag full of aixiz focus rings, backs, and springs
37x aluminium focus rings
1x brass focus ring
2x brass diode presses
190nm-450nm & 800nm-2000nm OD4 laser safety goggles
Blue laser safety goggles. Unsure of the specs but they seem to block 400-450nm entirely and let a little bit of 532nm through
Assorted flashlights
Star Trek phaser I was going to graft a 405 or 445 diode into but never did.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

I can say that the red-coated plastics are a REALLY amazingly economical alternative to 650-G-1 (Not to say that the 650-G-1 isn't where you want to go if you mean business) - but in some of the 635 builds we've been seeing lately, where we're trying to squeeze out every last drop of power, they're a really good way to do so.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

But only up to maybe 350-400mW or so.. These ARE still acrylics after all. I wouldn't want to try to push a huge amount of power through them. Up in the red range, there shouldn't be the UV discoloration that happens using acrylics with blues, but I think these will handle a moderate amount of red just fine. I haven't had any issues with the one that's been in my 330mW LOC yet.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Love that host. Love side-clickies. Love that focus ring

I'd love to grab:
- 1x host (Aluminum One $47.50)
- 3x Red Coated Acrylic (3x $3.50)
- 2x 445 glass lenses (2x $7.50)

Provided shipping to Canada is reasonable.

Also, one of your photos (this one - http://foxlightlasers.com/webstuff/lpf/100_0677.JPG) shows a body style with exposed silver bands at the tail and just below the clicky. I *DON'T* want that one. I'd like the all black body. Is that cool?

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Yeah that's the 'optional additional host machining'. heh.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Actually, full 180 here. I like that look after all. Reminds me of something from the 60's.

PM-ing you

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

I love this host set up From you. I will pick one up in the Early Futures For 110% Sure. Maybe in a couple weeks. Ive been watching you to put these up for some time op:

I can also Say those Red AR coated lenses are amazing. Much better then the AixiZ Glass. I also see a power increase comparing the AixiZ Glass and these AR coated acrylics.

I have now switched to using these lenses for all my red builds.

IMO they also focus tighter too.

I cant wait to get one of these Amazing host from you.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Wow, nice job on the host. That's some clean work. :yh: I would definately consider one in the future...

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Good news rhd. My belt patch worked long enough for me finish making the jig and get your host done. It should go out tomorrow. Treb, your lenses should go out in the morning as well.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

That looks amazing.... I'm really angry at you for showing me that when I have a final to cram for in 9.5 hours....

My special HL63133DG is already earmarked for a very special host. So I'm going to have to come up with something else unique to put in this guy. *wheels turning* Would be nice to figure out something other than a 405/445/650....

Anyway, looks awesome!

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

dammit rhd...so you are the guy that bought that last one qume had for sale. awww mannnnn!!!! I almost fell out of my chair when i saw the pictures + price. Guess im gonna have to wait.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

No he didn't buy the last one heh. I only had 3 to begin with. I ordered 5 originally, and the first two were prototypes. Of the 3 I had initially. DHR snagged the first, rhd got the second, and netmon22 got the last, which was a copper one. I ordered the other 10 about 3 weeks ago, so really, they should be here any day. And i'll actually order another 20 hosts tonight since half the 10 I just ordered are tentatively spoken for heh.

I guess I could sell the prototypes but one is the 'additional machining available' example, and the other has been floating around the bench in the shop for a while (and has rolled off a few times) so it's not the prettiest thing in the world now.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

PM Sent for Host for Awesome host

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

So qumefox can you put me up for two? 1 Al and 1 Cu

the next batch that is.

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Here is a little review I put up on the unit I received today.:beer:

1.4W Qumefox Sipik HK21 18650 Host
​

Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

What a look, Killer the best looking laser out here hands down :bowdown:
This is the best deal going if you don't sell out I will be supprised !