Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Not for sale : Mohgasm linear drivers $6 each, 1.6A/1.8A drivers $9.

Status
Not open for further replies.
Blord

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
I have Mohgasm drivers for sale. These are LM117 linear drivers. It needs two 3.7V batteries to operate. I have both the square and the 17mm round version. The drivers have a limited current options. A combination of two resistors is possible for more fine tuning of the current, example a driver with 3.3Ohm and 12.1Ohm resistor gives 482mA.

2.2Ohm (Adds 568mA)
1.0Ohm (Adds 1.25A)
3.3Ohm (Adds 378mA)
24.3Ohm (Adds 51mA)
12.1Ohm (Adds 103mA)

The current can also set at 1.6A or 1.8A. These drivers use the 1085 regulators.

IMG_0289.jpg


Aluminum sinks are NOT included !
C6-5.jpg


The price is $6 each, five for $25 and ten for $45.
The 1.6A and 1.8A version cost $9.
Shipping cost worldwide is $5. Add $6 for registered shipping.
I accept only PayPal.

Thanks for looking. :thanks:
 
Last edited:





Re: Selling Mohgasm drivers, $6 each !

Good luck with the sale! this is a steal for anybody indeed!
 
Re: Selling Mohgasm drivers, $6 each !

I'll take 5.
So the resistors are NOT fitted and all the other components ARE fitted?
 
Re: Selling Mohgasm drivers, $6 each !

AUS said:
I'll take 5.
So the resistors are NOT fitted and all the other components ARE fitted?
Click to expand...

That is right. The components are already soldered. You can add the set resistor yourself or I can do it for you. The resistors are big smd parts so handsoldering is no problem.
 
Re: Selling Mohgasm drivers, $6 each !

Would it be okay to power a 2w m140 diode If I use your 1.25 a driver with a 500ma driver?
 
Re: Selling Mohgasm drivers, $6 each !

HI Blord just curious are you selling the boards and 2 resistors for us to solder on separately? Ie we can effectively choose any current combination of any 2 resistors? Or do you already have 1 resistor in place on the board and supply a second one for us to add to modify the current?
Bit confused cos I recommended that Newb contact you about a 1.8 A driver and was under the impression he'd need a board and 1 x 1.0 and 1 x 2.2 Ohm resistors....:thinking:
 
Re: Selling Mohgasm drivers, $6 each !

These are the boards for sale. The resistors are provided with the sale. You need to add one or two smd resistor to the board to set the current.
I shall update the OP.

I have only one 1.8 jib driver that I don't use.

IMG_0289.jpg
 
Re: Selling Mohgasm drivers, $6 each !

Ok thanks that's what I thought! :beer:

Edit: I think it was your comment " These drivers will work at the max 1.25A." That was probably causing the confusion! I guess you were saying if you parallel the drivers ie a 1.25 A and a 500 mA it will run at 1.25 A max. Not we can only buy drivers from you at 1.25 A max! ;)
 
Last edited:
Re: Selling Mohgasm drivers, $6 each !

Wait, so if I buy the 1.8a driver I can't just attach both to the diode? I have to solder on some resistors first?
 
Re: Selling Mohgasm drivers, $6 each !

Newb said:
Wait, so if I buy the 1.8a driver I can't just attach both to the diode? I have to solder on some resistors first?
Click to expand...

I can solder the resistor for you but you need to solder the diode to the driver anyway. A soldering iron is mandatory for laser builds.
 
Re: Selling Mohgasm drivers, $6 each !

I know but I'm not good at soldering, especially when its close to anything else. I could handle the 4 connections since they're pretty spread out but i ruined my last driver by trying to solder. If I bought the 1.8a could you solder on the resistor for free then? That would be really helpful.

edit: I'm really new to actually Building lasers, I have only made one other simple laser in an altoids tin. I read that most people blow their diodes on theirfirst build so i'm trying to be extra careful.
 
Last edited:
Re: Selling Mohgasm drivers, $6 each !

The 1.8 jib driver is already complete and set at 1.8A. You only need to solder the 4 wires and heatsink the driver.
 
Re: Selling Mohgasm drivers, $6 each !

Sorry, i'm not sure if your selling 1.8s but if you are can you send me the link?
 
Last edited:
Status
Not open for further replies.





Back
Top