Jufran88
0
- Joined
- Feb 9, 2011
- Messages
- 578
- Points
- 0
Please don't forget to read the disclaimer at the end of this post!!
Hey guys it's been awhile! I'm cleaning up and just need to sell some stuff that I don't really need anymore.
First up! My 2nd laser build featured here [link]
The tail cap threads are a bit damaged so I put Teflon tape to remedy the problem. Otherwise, it's a great laser and burns well.
Diode: PHR-803T
Wavelength: 405nm
Host: Hotlight
Lens: Aixiz glass
Battery: 1 x 18650 (loose) or 1 x 22500 (recommended)
Driver: LMS1587 @ 108 mA
Output: ~70 mW
Price: $18 USD + $5.15 USD shipping (CONUS) SOLD!!!
Second, the red guidesman, build link here [link]
This thing has a beefy heat sink and custom focus adapter all made by JayRob. Also, comes with silicone battery tube to fit an 18650.
Diode: Mitsubishi 300 mW ML520G71
Wavelength: 635nm
Host: Guidesman
Lens: AR coated acrylic
Battery: 1 x 18650 w/ battery sleeve or 1 x 22500
Driver: AMC7135 @ 1071 mA
Output: ~500 mW
Price: $120 USD + $5.15 USD shipping (CONUS) SOLD!!!
Third, a broken Sky lasers DPL handheld
The output is very dim, otherwise it would be great for a DIY host if you can part it out.
Wavelength: 405nm
Battery: 2 x 16340 or 2 x 3.6v CR123
Features: adjustable open/close aperature, key switch, LED indicator
Price: $25 USD + $5.15 USD shipping (CONUS) SOLD!!!
Shipping:
Prices above do not reflect international shipping prices. Please PM for international shipping.
***Disclaimer***
By purchasing items you agree to the following:
Thanks for looking!
Hey guys it's been awhile! I'm cleaning up and just need to sell some stuff that I don't really need anymore.
First up! My 2nd laser build featured here [link]
The tail cap threads are a bit damaged so I put Teflon tape to remedy the problem. Otherwise, it's a great laser and burns well.
Diode: PHR-803T
Wavelength: 405nm
Host: Hotlight
Lens: Aixiz glass
Battery: 1 x 18650 (loose) or 1 x 22500 (recommended)
Driver: LMS1587 @ 108 mA
Output: ~70 mW
Price: $18 USD + $5.15 USD shipping (CONUS) SOLD!!!
Second, the red guidesman, build link here [link]
This thing has a beefy heat sink and custom focus adapter all made by JayRob. Also, comes with silicone battery tube to fit an 18650.
Diode: Mitsubishi 300 mW ML520G71
Wavelength: 635nm
Host: Guidesman
Lens: AR coated acrylic
Battery: 1 x 18650 w/ battery sleeve or 1 x 22500
Driver: AMC7135 @ 1071 mA
Output: ~500 mW
Price: $120 USD + $5.15 USD shipping (CONUS) SOLD!!!
Third, a broken Sky lasers DPL handheld
The output is very dim, otherwise it would be great for a DIY host if you can part it out.
Wavelength: 405nm
Battery: 2 x 16340 or 2 x 3.6v CR123
Features: adjustable open/close aperature, key switch, LED indicator
Price: $25 USD + $5.15 USD shipping (CONUS) SOLD!!!
Shipping:
Prices above do not reflect international shipping prices. Please PM for international shipping.
***Disclaimer***
By purchasing items you agree to the following:
- You are over 18 years of age.
- You are qualified to handle and operate high power lasers!
- You assume all responsibility, you will not hold seller liable for any damages to person or property.
- You acknowledge that pointing any laser at any aircraft is a federal crime, which is punishable by law.
- You acknowledge laser laws imposed in your area. [laserpointersafety.com]
- You exercise good judgement and "common sense" when operating any lasers.
- Laser diodes are prone to ESD (electrostatic discharge) damage, and proper ESD precautions must be observed to prevent this.
- Due to the sensitive nature of electrical components, DIY parts/components are sold as-is with no warranty.
- Laser diodes can cause BLINDNESS do not look into beam, and be mindful of reflections they are just as dangerous!! Proper eye wear is a must!
- Laser diodes must have the proper driving circuits for operation. Also to run this at full power proper cooling is required! Failure to do so will cause irreparable damage to your diode and render it useless, or turn it into an expensive LED.
Thanks for looking!
Last edited: