danefex
0
- Joined
- Aug 30, 2010
- Messages
- 1,595
- Points
- 63
Greetings folks!
Up for sale here I have 4 custom built handheld lasers from my personal collection that I've decided to pass along to make room for new hosts. These lasers have various outputs depending on what kind of focus lens you use with them. Unfortunately I currently don't have any 405-G-1 lenses to sell with these so the prices are reduced despite each listing showing the high output first (405 G lens) and normal output second (3 element lens). Here is some detailed information about each unit.....
PICTURED FROM LEFT TO RIGHT:
Lighthound 1.7W / 1.4W 2x14500 445nm Custom Blue Laser - SOLD -
I made a thread off of this build covering just about everything with this laser that can be found right here I am asking $160 + shipping for this unit that comes a 3 element lens & 2x 14500 batteries, if you are interested in this laser & have any questions please feel free to ask in this thread or PM me
MXDL 1.8W / 1.4W 'super bright' 445nm Custom Blue Laser - SOLD -
This is a unique host that I have not seen before on the forum, not sure if these are out there or not. This build is using an H1600 445nm diode housed in a custom jayrob heatsink driven by a 1.8A Lazeerer X-Drive and powered with 2 RCR123 batteries. The suggested duty cycle is 2 min on / 30 seconds off - which is playing it safe. The X-Drive being used in this build supposedly doesn't overheat so the laser can probably be run longer but again, I play it safe for longevity
I have picures documenting this build that I can upload & share upon request. I am asking $160 + shipping for this unit, it comes with a 3 element lens & 2 RCR 123A batteries. If you have any interest or questions please feel free to post here or PM 
2 x Chinese Police Custom 'side clicky' 445nm Blue Laser - 1.8W/1.5W unit SOLD - - 1.5/1.3W unit SOLD -
I have 2 of these units for sale, one of them outputs 1.8W (405 G) / 1.4W (3 element) and the other outputs 1.5W (405 G) / 1.3W (3 element).
The 1st unit (1.8W/1.4W) uses a M140 445nm diode housed in a jayrob custom heatsink driven by a mohgasm 1.8A heatsinked driver and powered with 2 AW 16340 batteries. The suggested duty cycle is 1min on / 30 seconds off. I also have pictures documenting this build that I am happy to share upon request
I am asking $150 + shipping for this unit which comes with a 3 element lens, 2 16340 batteries & a recharging unit that plugs into a power outlet OR in your car. If you are interested in this unit or have any questions to ask, please feel free to do so in this thread or you can PM me 
The 2nd unit (1.5W/1.3W) is basically identical to the previous one except it uses a 1.5A mohgasm driver instead of 1.8A. Everything else is the same except for the heatsinking on the slightly less powerful driver. Also this model did not come with a recharge kit, no idea why. I am asking $120 + shipping for this unit which comes with a 3 element lens & 2 AW 16340 batteries. As with all of these listings, if you are interested or have any questions please post them here or PM me :beer:
Here are some pics of the 1.8W/1.4W CPL build to give you an idea of how it was put together. The build for the other laser is identical except for the driver & its heatsink
1.8/1.4W CPL power reading
1.5/1.3W CPL power reading
All of these units are NEW with barely any use. I have built them, tested them & set them aside to pass along to the forum. Thank you for reading and for your interest! Here's some beamshots to give you an idea of how these look in action! :beer:
:beer:
These terms apply to anyone interested in buying from me, you will need to agree to the following guidelines:
*You must be 18 yrs or older to purchase any laser(s) or equipment.
*You must own or use suitable laser protection goggles for the power & wavelength of laser your are interested in.
*You must understand the safe and legal use of handling any laser pointer or handheld laser and be aware of the consequences and penalties the follow misusing such a device.
*You agree not to tamper with OR dissamble any laser you purchase, doing so will void any technical support or free repairs to any problems that may arise.
*You argree to respect the suggested duty cycle with any laser from me, this will ensure a healthy long life from any of my custom units.
*You agree to NEVER point a laser at any person, animal or any aircraft, boats or vehicles or machinery operated by another person.
*Paypal preferred as payment, buyer MUST have a confirmed paypal account.
**This is not a laser pointing device. At all times, protective laser safety glasses appropriate for this wavelength must be worn by the operator. This laser should not be used by 3rd parties for any recreational purpose.
Last edited:
