Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Hi from Quebec Canada

Joined
Sep 20, 2008
Messages
17,622
Points
113
Hi All,
I decided to join this forum because I wanted to learn more about the new
laser technologies. I had been sneaking a look at the forum as a guest for a few
weeks.
It looks like there are a lot of well informed members here and I was hopping that
some of their knowledge will rub off on me.
I hope I can share some of my knowledge with the members here as well.

Jerry
 





JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Sawt al Hurriyah said:
Hey!

Welcome to the forum, I am sure you will learn tons here.

BTW, I live in Ottawa, Ontario, just across the river from Quebec ;)


I live in Toronto (just down the street ;)) I have been to both Quebec and Ottawa, most recently Ottawa to pick up a lathe. The drive was fun, cleaner air and the great Canadian landscapes. :)
 
Joined
Sep 20, 2008
Messages
17,622
Points
113
Ignore this Post... It is merely a Clipboard for composing
Threads/Posts

=============================================
Plave in:- Drivers, Test-load, Power Supply, & Batteries
Title :- Adjustable Lab Laser Diode Power Supply

We've been looking for an adjustable Lab Laser Diode Power
supply for quite some time now. We already have a commercial
Opto Power Corp OPC4005 40 Amp adjustable Laser Diode supply
that we use for Coating testing and LaserBee LPM calibrations.

That supply measures about 18" X 14" X 3.5" and weigh quite a
bit. We have looked at the eBay/AliExpress CV/CC power supplies
but don't like/trust their output noise/spikes.

Recently I've come across an EEVblog Y/T video of a small CV/CC
PS from an AliExpress seller and decided to get one of his other
PS models.
I decided on the DPH3205.

https://www.aliexpress.com/item/RD-DPH32305-Constant-Voltage-current-Buck-boost-Programmable-digital-Power-Supply-buck-Voltage-converter-color-LCD/32762131242.html?spm=a2g0s.9042311.0.0.nTIpxS

HTB1cuJmOXXXXXcqXFXXq6xXFXXXJ.jpg


This is a 32 Volt 5 Amp Constant Voltage/Constant Current PS
that has a small color LCD display with tactile control buttons
and a rotary selection control knob.

There is a Setup menu that you can set the Over Voltage
Protection as well as the Over Current Protection. That is
what I found very useful and is included in our much more
expensive OPC4005 PS.

I chose this model because the LCD display shows 1mA resolution
You also have an option to get the metal case designed for the
PS. I highly recommend buying it.

https://www.aliexpress.com/item/RD-DPS5015-DPS3012-DPH3205-Power-Supply-housing-Constant-Voltage-current-casing-digital-control-buck-Voltage-converter/32794029335.html?spm=a2g0s.9042311.0.0.nTIpxS

HTB1xqKeQVXXXXbFXXXXq6xXFXXX3.jpg


The only thing I didn't like about it mechanically was that it did
not have a tilt handle to tilt the display up from flat on the work
bench. I designed a simple solution that anyone can easily build.

[See Attached Pic below]

Once it was assembled I decided to test the electrical specs
and check for hidden spikes while adjusting the Voltages and
currents on a Digital Storage scope. I attached a Dummy Load
to the output and scoped the Sense Resistor.

Depending on how clean the input supply to the PS is depends
a lot on the noise of the output. I typically get about 70mV to
100mV zero line noise.

Turning the supply output ON and Off from the On/Off button
on the Display panel showed no spikes at all or at least I didn't
detect any with a one shot scope detection.

Incrementing the current by 1mA steps showed a clean step
every time without and spiking.

Incrementing the current by 100mA steps again showed no
detectasble spiking on the scope.

To say the least... I'm very impressed with this extremely small
physical size of this CV/CC Power Supply and would recommend
it to anyone that wants an adjustable Lab style Laser Diode PS

And you can't beat the ridiculously low price for the quality
and specs....IMO


Jerry




=============================================
TEMP EDIT
Eat Shit you uneducated Asshole
Manger de la Merde mon trou du cul non éduqué

Eat Shit you uneducated clown
Manger de la Merde mon cloune non éduqué


Jerry
J.BAUER Electronics

You can contact us at any time on our Website: J.BAUER Electronics
 
Last edited:
Joined
Sep 20, 2008
Messages
17,622
Points
113
wannaburn said:
[quote author=Sawt al Hurriyah link=1221932188/0#1 date=1221933195]Hey!

Welcome to the forum, I am sure you will learn tons here.

BTW, I live in Ottawa, Ontario, just across the river from Quebec ;)


I live in Toronto (just down the street ;)) I have been to both Quebec and Ottawa, most recently Ottawa to pick up a lathe. The drive was fun, cleaner air and the great Canadian landscapes. :)[/quote]

Het wannaburn,
next time you're in the area...... stop by and see my toys. ;D ;D ;D
 

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
I most definately will :)  I dont get out that way too often, but when I do...  Good to see you on the forum, you joined at the perfect time,  ;DMINIMAL DRAMA ;D
 
Joined
Sep 20, 2008
Messages
17,622
Points
113
Ignore this Post... It is merely a Clipboard for composing
Threads/Posts

Jerry



You can contact us at any time on our Website: J.BAUER Electronics
 
Last edited:
Joined
Sep 20, 2008
Messages
17,622
Points
113
Yeah Sawt,
I'm about 10km north of the 401 and about 6km from the Quebec/Ontario
boarder. Just north of Riviere Beaudette.
I've heard good things about the Kenometers. If ever your in the area bring your Kenometer
down. I would like to see one up close. :)
 
Joined
Feb 23, 2008
Messages
2,832
Points
48
lol i got a lasersbee lpm but i guess you already know what those look like... :D put mine in a nice lil wooden box for easy storage ;D welcome to the forum
 
Joined
Sep 20, 2008
Messages
17,622
Points
113
LPF Clipboard

Ignore this Post... It is merely a Clipboard for composing
Threads/Posts

Jerry


=============================================

Because the Kenometer is finished.... Laserbees still are the most accessible and most probably the most market saturated hobbyist meter there is..

It would make sense to tinker with the most accessible/common product as apposed to a discontinued product... That's just my thoughts anyway.

I don't see the Logic... Most of the LaserBee products we
have sold have the Data Logging feature included.

There are only a few we sold without the Data Logging
feature for those that wanted to save an extra few $$$.

There must have been less that 15 units sold.
Like I said I can't see the logic unless it is another one
of Tevor's TROLL attempts...
 
Last edited:
Joined
Sep 20, 2008
Messages
17,622
Points
113
LaserBee™/EagleEye™ - The Ultimate Standard for Hobbyist's Laser Power Meter needs..



UPDATE June 29 2013

We can now offer the LPF Forum community an exclusive
eligible Members 10% Refund Discount on selected LaserBee
products whether offered here... on our website or eBay.
This applies to the price of the LaserBee product but not
to the shipping costs. Since we sell on different venues the
prices and currency of where you purchase the LaserBee
product will apply.
(See eligibility conditions on the LPF Sales Threads linked below).


___________________________________________

You can now find out all about our LaserBee™ Laser Power Meter Products under
one roof right here on LaserPointerForums.com...

LaserBee™ products have been sold since 2008 by J.BAUER Electronics...
We are the sole Owner...Designer.. Manufacturer and Seller of the trade marked
LaserBee™ Products including our trade marked full featured EagleEye™ data
logging Windows compatible software.

You can go to our Website for more detailed info and retail pricing..

J.BAUER Electronics Home

Check our DIY LPM Projects Info Thread for DIY LPM Links... LPM Projects....
and LPM Reviews...


NOTE:
Any questions or queries should be sent by PM or E-Mail and not Posted on
this Thread. Questions will not be answered here...

___________________________________________

Here is a list and pics of our LaserBee Product
line as of June 29 2013....



Index of listings below


- 1W Standard OEM LaserBee™ I
- 1W Deluxe LaserBee™ I
- 2.1W Standard OEM LaserBee™ I-X
- 2.1W Deluxe LaserBee™ I-X
- 3.2W Standard OEM LaserBee™ II
- 3.2W Deluxe LaserBee™ II
- Deluxe LaserBee™ III (coming soon)
- Limited Edition 10W LaserBee™ + Data Logging (coming soon)
- LaserBee™ 2.5W USB
- LaserBee™ 3.7W USB
- 2Watt LaserBee™ A
- 3.1Watt LaserBee™ AX
- Limited Edition 5W LaserBee™ + Data Logging
- DL3-Module™ LPM New Data Logging Add-On
- Split Rail Regulated +/- supply for OPHIR 20C heads (coming soon)
- EagleEye™ Data Logging Software
- EagleEye™ Data Logging Software on Flash Drive Option (Available soon)


_________________________________________________

1 Watt Standard OEM LaserBee™ I
1Watt Standard OEM LaserBee™ I

8x8-2.jpg


Specifications

Power Requirement:................. 7-12 volts DC (9volt battery or 9volt AC Adapter recommended)
Sensor:..................................... Thermopile (by J.BAUER Electronics)
Sensor Area:............................. 8mm X 8mm (64 square mm)
Response Time 100%:.............. 10-15 seconds
Response Time 90%:................ 4-5 seconds
Wavelength Range:.................. 300nm to 1200nm
Cable Length:.......................... 12"
Thermal head dimensions:....... 1.650" X 1.500" X 1.000"
Power Range:........................... 5mW - 1050mW in 1mW increments
Power consumption:................. 5mA @ 9vdc (without LCD Backlight)
Power consumption:................. 17mA @ 9vdc (with LCD Backlight)
Total Dimensions:..................... 2.550" X 1.900" X 0.950" (including LCD)
PC Interface Software:............. on CD
User Instructions:..................... on CD




1 Watt Deluxe LaserBee™ I
1 Watt Deluxe LaserBee™ I

dlb0.jpg


Specifications

Power Requirement:................. 7-12 volts DC (9volt battery recommended)
Sensor:..................................... Thermopile (by J.BAUER Electronics)
Sensor Area:............................. 8mm X 8mm (64 square mm)
Response Time 100%:.............. 10-15 seconds
Response Time 90%:................ 4-5 seconds
Wavelength Range:.................. 300nm to 1200nm
Cable Length:........................... 12"
Thermal head dimensions:........ 1.650" X 1.500" X 1.000"
Power Range:........................... 6mW - 1050mW in 1mW increments
Power consumption:................. 5mA @ 9vdc (without LCD Backlight)
Power consumption:................. 65mA @ 9vdc (with LCD Backlight)
Total Dimensions:...................... 5.500" x 3.125" x 1.500"
PC Interface Software:............. on CD
User Instructions:..................... on CD




2.1 Watt Standard OEM LaserBee™ I-X

8x8-2.jpg


Specifications

Power Requirement:.................. 7-12 volts DC (9volt battery or 9volt AC Adapter recommended)
Sensor:...................................... Thermopile (by J.BAUER Electronics)
Sensor Area:.............................. 8mm X 8mm (64 square mm)
Response Time 100%:............... 10-15 seconds
Response Time 90%:................. 4-5 seconds
Wavelength Range:................... 300nm to 1200nm
Cable Length:............................ 12"
Thermal head dimensions:......... 1.650" X 1.500" X 1.000"
Power Range:............................ 5mW - 2100mW in 1mW increments
Power consumption:.................. 5mA @ 9vdc (without LCD Backlight)
Power consumption:.................. 17mA @ 9vdc (with LCD Backlight)
Total Dimensions:...................... 2.550" X 1.900" X 0.950" (including LCD)
PC Interface Software:.............. on CD
User Instructions:...................... on CD




2.1 Watt Deluxe LaserBee™ I-X

LB-IX.jpg


Specifications


Power Requirement:................. 7-12 volts DC (9volt battery recommended)
Sensor:..................................... Thermopile (by J.BAUER Electronics)
Sensor Area:............................. 8mm X 8mm (64 square mm)
Response Time 100%:.............. 10-15 seconds
Response Time 90%:................ 4-5 seconds
Wavelength Range:.................. 300nm to 1200nm
Cable Length:........................... 12"
Thermal head dimensions:........ 1.650" X 1.500" X 1.000"
Power Range:........................... 5mW - 2100mW in 1mW increments
Power consumption:................. 5mA @ 9vdc (without LCD Backlight)
Power consumption:................. 65mA @ 9vdc (with LCD Backlight)
Total Dimensions:..................... 5.500" x 3.125" x 1.500"
PC Interface Software:............. on CD
User Instructions:..................... on CD




3.2 Watt Standard OEM LaserBee™ II
3.2 Watt Standard OEM LaserBee™ II

LB2-OEM.jpg


Specifications

Power Requirement:.................. 7-12 volts DC (9volt battery or 9volt AC Adapter recommended)
Sensor:...................................... Thermopile (by J.BAUER Electronics)
Sensor Area:.............................. 8mm X 8mm (64 square mm)
Response Time 100%:............... 10-15 seconds
Response Time 90%:................. 4-5 seconds
Wavelength Range:................... 300nm to 1200nm
Cable Length:............................ 18"
Thermal head dimensions:......... 1.650" X 1.500" X 1.000"
Power Range:............................ 3mW to 3200mW in 0.1mW increments to 999.9mW then 1mW to Max
Power consumption:.................. 5mA @ 9vdc (without LCD Backlight)
Power consumption:.................. 17mA @ 9vdc (with LCD Backlight)
Total Dimensions:...................... 2.550" X 1.900" X 0.950" (including LCD)
PC Interface Software:.............. on CD
User Instructions:...................... on CD




3.2 Watt Deluxe LaserBee™ II
3.2 Watt Deluxe LaserBee™ II

LB2-LPM.jpg


Specifications

Power Requirement:.................. 7-12 volts DC (9volt battery recommended)
Sensor:...................................... Thermopile (by J.BAUER Electronics)
Sensor Area:.............................. 8mm X 8mm (64 square mm)
Response Time 100%:............... 10-15 seconds
Response Time 90%:................. 4-5 seconds
Wavelength Range:................... 300nm to 1200nm
Cable Length:............................ 18"
Thermal head dimensions:......... 1.650" X 1.500" X 1.000"
Power Range:............................ 3mW to 3200mW in 0.1mW increments to 999.9mW then 1mW to Max
Power consumption:.................. 5mA @ 9vdc (without LCD Backlight)
Power consumption:.................. 65mA @ 9vdc (with LCD Backlight)
Total Dimensions:....................... 5.500" x 3.125" x 1.500"
PC Interface Software:.............. on CD
User Instructions:...................... on CD




Deluxe LaserBee™ III
(Coming soon)




Limited Edition 10W LaserBee™
(Coming soon)




LaserBee™ 2.5W USB
(Discounted to LPF Members exclusively)
http://laserpointerforums.com/f64/j-bauer-electronics-laserbee-2-5-watt-usb-only-data-logging-119-99-stock-now-61644.html#post873729

LB-USB.jpg


LB-USB-S.jpg


Specifications

Power Requirement:.................. Power Supplied by the USB Port
Sensor:...................................... Thermopile (by J.BAUER Electronics)
Sensor Area:.............................. 15mm X 15mm (225 square mm)
Response Time 100%:............... 30-45 seconds
response Time 90%:.................. 15-16 seconds
Wavelength Range:................... 300nm to 1200nm
USB Cable Length:..................... 21"
Head Cable Length.................... 20"
Thermal head dimensions:......... 1.650" X 1.500" X 1.000"
Power Range:............................ 0mW to 2500mW in 1mW increments
Power consumption:.................. 60mA
Total Dimensions:...................... 3.750" X 2.400" X 1.000"
PC Interface Software:.............. supplied
User Instructions:...................... supplied



LaserBee™ 3.7W USB
(Discounted to LPF Members exclusively)
http://laserpointerforums.com/f64/fs-j-bauer-electronics-laserbee-3-7-watt-usb-eagleeye-logging-stock-now-80627.html#post1158237

LB3.7USB-s.jpg


3.7WTHERM-s.jpg


Specifications

Power Requirement:.................. Power Supplied by the USB Port
Sensor:...................................... Thermopile (by J.BAUER Electronics)
Sensor Area:.............................. 15mm X 15mm (225 square mm)
Response Time 100%:............... 30-45 seconds
Response Time 90%:................. 15-16 seconds
Wavelength Range:.................... 300nm to 1200nm
USB Cable Length:..................... 21"
Head Cable Length:................... 20"
Thermal head dimensions:......... 1.650" X 1.500" X 1.000"
Power Range:............................ 0mW to 3700mW in 1mW increments
Power consumption:.................. 4.7mA
Total Dimensions:....................... 4.95" X 2.75" X 0.95"
PC Interface Software:............... supplied
User Instructions:...................... supplied



2Watt LaserBee™ A
(Discounted to LPF Members exclusively)
http://laserpointerforums.com/f64/fs-laserbee-2watt-laser-power-meters-stock-ready-ship-70540.html#post1017250

LB-A-2.jpg


Specifications

Power Requirement:................. 7-12 volts DC (9volt battery recommended)
Sensor:..................................... Thermopile (by J.BAUER Electronics)
Sensor Area:............................. 15mm X 15mm (225 square mm)
Response Time 100%:.............. 30-45 seconds
response Time 90%:................. 15-16 seconds
Wavelength Range:.................. 300nm to 1200nm
Cable Length:........................... 22"
Thermal head dimensions:....... 1.650" X 1.500" X 1.000"
Power Range:........................... 0mW to 2000mW in 1mW increments
Power consumption:................. 30mA
Total Dimensions:..................... 4.100" X 2.500" X 1.500"
User Instructions:..................... Supplied




3.1Watt LaserBee™ AX
(Seen on eBay and Discounted to LPF Members exclusively)
lasersbee | eBay

LB-AX-Grn-s.jpg


Specifications

Power Requirement:................. 7-12 volts DC (9volt battery recommended)
Sensor:..................................... Thermopile (by J.BAUER Electronics)
Sensor Area:............................. 15mm X 15mm (225 square mm)
Response Time 100%:.............. 30-45 seconds
Response Time 90%:................ 15-16 seconds
Wavelength Range:.................. 300nm to 1200nm
Cable Length:........................... 18"
Thermal head dimensions:....... 1.650" X 1.500" X 1.000"
Power Range:........................... 0mW to 3100mW in 1mW increments
Power consumption:................. 25mA
Total Dimensions:..................... 4.100" X 2.500" X 1.500"
User Instructions:..................... Supplied




Limited Edition 5Watt LaserBee™ + Data Logging
(Note: only sold on eBay)

5W-LaserBee.jpg


Specifications

Power Requirement:................. 9-12 volts DC
Sensor:..................................... Thermopile (by OHIR 20C-A)
Sensor Area:............................. 12mm Diameter
Response Time 100%:.............. 3-5 seconds
Response Time 95%................. 0.8 seconds
Wavelength Range:.................. 190nm to 10.6um (10600nm)
Cable Length:........................... 24"
Thermal head dimensions:....... 1.650" X 1.500" X 1.000"
Power Range:........................... 0mW to 5000mW in 1mW increments
Power consumption:................. 160 milliAmps @ 9VDC
Total Dimensions:..................... 5.5" x 3.125" x 1.5"
PC Interface Software:............. on CD




DL3-Module™ LPM Add-On Data Logging
(Coming soon)

DL3-Module-s.jpg


Much smaller than our previous DL2-Module™.

Can be added to all non-data logging LPMs like Kenometers... Kenometer Lites....Nospin 5W...
LaserBee As LaserBee AX and Alphas... Can also be used to make a calibrated DIY Laser Power
Meter if you have a calibrated Thermopile Head that outputs 1mV/1mW like the OPHIR 20C-A.
Installation Instructions and Drawings supplied.

Here is a Thread of an Alpha that we modified to add our DL2-Module™ and EagleEye™ Data
Logging feature..

http://laserpointerforums.com/f51/modifying-alpha-laser-power-meter-data-logging-62091.html#post881648

Pic of older DL2-Module.
DL-M.jpg


Specifications

Power Requirement:................ 5-12 volts DC
Power Range:.................. ....... 0 to 5000mW
Power consumption:................ 3mA
Total Dimensions:.................... 1.55" X 0.85" (39.5mm X 21.5mm)
PC Interface Software:............ supplied
User Instructions:............... .... supplied



Split Rail Regulated +/- Power Supply for OPHIR 20C
Thermopile Heads

(Coming soon)

Includes a regulated output for a 4-1/2 Digit DPM...
All running off one (1) supply input.

OPHIR-s.jpg





Full Featured Windows Eagle Eye™ Data Logging Software

Eagle-Eye-Main-s.jpg


Eagle-Eye-Chart-s.jpg



Our new full featured Eagle Eye™ Windows compatible Data Logging Software comes bundled
with many of our LaserBee™ products that have the Data Logging feature included.


Here are just a few of its many outstanding features.....

- Graphs are automatically re-scaled (no need to tell the software your expected Laser power)
- Graph File Names are now displayed on any saved graph charts.
- See a 45 second Graph Window or the whole Graphing Session at a glance.
- Fantastic Zoom In-Out control on Main Screen Graph and saved Charts.
- Zoom In and Out for any Points along the entire Graph.
- Files saved in common Excel format
- Newly added Save as Image file for easier Graph chart sharing...
- Newly added Point values in Graphs and Charts to see any point on a Graph/Chart as a value
- Max and Average reading bars.
- Debug mode with slider to test the Eagle Eye™ features.
- Print your Graphs to your printer. Great feature if you want to include a Power Chart for that
Laser you are selling.





Eagle Eye™ Data Logging Software on Flash Drive Option
(Available soon)

LB-III%20FLASH-s.jpg




_________________________________________________

CONTACT

For Website Sales you can contact us through our Website....

For eBay Sales you must contact us through the eBay message system....

For any Discounted LPF Members Forum Sales you can send me a PM
or E-Mail us at:- info(at)bauer-ee(dot)com

Please remember that all sales are conducted through their respective selling
venue at their venue's stated currency...

For Website Sales click here...
-----> J.BAUER Electronics Website Sales

For eBay Sales click here...
--------> eBay Sales

For LPF Discount Refund Sales click a link below....
-----> NEW 2013 DISCOUNT PRICING -LaserBee A Laser Power Meter.. In Stock Now

-----> http://laserpointerforums.com/f64/fs-j-bauer-electronics-laserbee-2-5-watt-usb-only-data-logging-stock-now-61644.html#post873729

-----> http://laserpointerforums.com/f64/fs-j-bauer-electronics-laserbee-3-7-watt-usb-eagleeye-logging-stock-now-80627.html#post1158237





_____________________________________________

Legal Disclaimer

Please be advised that this disclaimer is for Legal reasons and
to be absolutely clear.

J.BAUER Electronics is the sole designer and manufacturer of all
the LaserBee™ Laser Power Meter products and is the sole owner
of all copyrights and trademarks for the LaserBee™ products and
the EagleEye™ software.

Anyone that implements/uses any unauthorized nor approved nor
endorsed nor tested (by J.BAUER Electronics) 3rd party firmware on
any of our products will unconditionally void any Warranty and/or
any present or future Customer Service for their LaserBee product.

Furthermore.. any present or any future unauthorized 3rd part mimicking
of our Intellectual Property (IP) and work product is not recognized,
endorsed, recommended, or approved to be used on any LaserBee™
product ever manufactured by J.BAUER Electronics now or in the
future unless otherwise stated by J.BAUER Electronics.

©2008-2014 J.BAUER Electronics. All rights reserved. LaserBee, EagleEye,
the J.BAUER Electronics Logo, and all associated logos and designs are
trademarks or registered trademarks of J.BAUER Electronics. All other
registered trademarks or trademarks are property of their respective
owners. All rights reserved.


_____________________________________________

Jerry Bauer pres.
J.BAUER Electronics
J.BAUER Electronics Home


NOTE:
Any questions or queries should be sent by PM or E-Mail and not
Posted on this Thread. Questions will not be answered here...




You can contact us at any time on our Website: J.BAUER Electronics
 
Last edited:




Top