Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Will a NUBM06 and X-Drive fit a laserbtb PL 405/445nm host?

AaronT

Active member
Joined
Jun 12, 2016
Messages
467
Points
28
A question for anyone who has a laserbtb PL 405/445nm 500-2000mW.

Will a 12mm module from DTR and Driver will fit in a laserbtb/sky host?



It would be great if someone wouldn't mind taking some pics and measurements of the host and its parts disassembled.
 
Last edited:



BillyBob

New member
Joined
Mar 7, 2015
Messages
218
Points
0
You can't take the Pl host apart. I bought one about 1.5 years ago and it died on after a while. So I tried to take it apart and its all super glued/ pressure fitted there is almost no way it can be taken apart after being put together.
 

AaronT

Active member
Joined
Jun 12, 2016
Messages
467
Points
28
You can't take the Pl host apart. I bought one about 1.5 years ago and it died on after a while. So I tried to take it apart and its all super glued/ pressure fitted there is almost no way it can be taken apart after being put together.
Destroyed in the attempt or something you may be willing to part with?

I know of a couple of solvents that have a good chance of removing the glue without harming the host.
 

Sta

Well-known member
Joined
Jan 27, 2014
Messages
1,728
Points
83
Destroyed in the attempt or something you may be willing to part with?

I know of a couple of solvents that have a good chance of removing the glue without harming the host.
Even if you manage to disassemble it, the heatsink isn't large enough to handle a NUBM06 reliably. Have you considered using a PL-E Pro host from Jetlasers?
 

AaronT

Active member
Joined
Jun 12, 2016
Messages
467
Points
28
Even if you manage to disassemble it, the heatsink isn't large enough to handle a NUBM06 reliably. Have you considered using a PL-E Pro host from Jetlasers?
It's on my short list, do they have an option/be willing to sell just the host?
 

BillyBob

New member
Joined
Mar 7, 2015
Messages
218
Points
0
Mine got destroyed while taking apart and the heat sink really isn't that big.
 

AaronT

Active member
Joined
Jun 12, 2016
Messages
467
Points
28
Mine got destroyed while taking apart and the heat sink really isn't that big.
Do you recall if it was large enough to fit 12mm module?

I'm looking for a 15sec max runtime so the size of the sink isn't an issue.
 

Gabe

Well-known member
Joined
Jan 10, 2015
Messages
1,181
Points
83
If you're really nice and leave chocolates on his pillow or something, Gray from Jetlasers can probably hook you up with a bare host. I asked him for one of the bare 473nm DPSS modules because they're the only ones that make them that powerful, and he said sure it would be possible to get just the module. Not sure if this was because we know each other and I'm a returning customer, but you can always shoot them an email with nothing to lose.
 




Top