LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Which side is negative and which is positive
- Thread starter H3llk03r
- Start date
- Joined
- Aug 10, 2008
- Messages
- 268
- Points
- 18
- Joined
- Oct 26, 2007
- Messages
- 5,438
- Points
- 83
Assuming that's a driver from Dr. Lava (who can tell from a blurry photo like that), he usually ships it with the instruction guide.
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
^^^Post #2^^^^
If all else fails.... READ THE INSTRUCTIONS/MANUAL...
And doing a little research on your own using the Forum wouldn't hurt...
Jerry
Jerry
If all else fails.... READ THE INSTRUCTIONS/MANUAL...
And doing a little research on your own using the Forum wouldn't hurt...
Jerry
Jerry
Kevlar
0
- Joined
- Apr 26, 2010
- Messages
- 1,353
- Points
- 48
Not to mention, its marked on the driver
Morgan
0
- Joined
- Feb 5, 2009
- Messages
- 2,174
- Points
- 0
It is a Flexdrive, (well, most knew that already huh?). Some of us have been shown this driver in previous photos when a diode was attached but they were deleted by the OP.
It was a better photo and clearly showed the +ve labels and the, "Flex", printed on it.
M
It was a better photo and clearly showed the +ve labels and the, "Flex", printed on it.
M
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
With the V5 FlexDrive, the negative input is the connection that is closest to the edge of the board...
- Joined
- Feb 21, 2009
- Messages
- 231
- Points
- 18
The pin that's next to the flx 5+ is the positive and the other is negative or from your picture the bottom pin is + and top is -
