Their on their way!

[Lifetime17]

Hi BM,
your going to like the laser with that 10X BE, i have a 10X on a sinner 462 and it will do this at 32 feet +

 

[BobMc]

Hi BM,
your going to like the laser with that 10X BE, i have a 10X on a sinner 462 and it will do this at 32 feet +

Thanks Rich, those are some awesome burn marks at 35 feet. Now I'll be able to sign my name from across the street.

Will the 10x screw/fit on the standard 12mm module or did you make an adapter for it.

 

[Lifetime17]

HI BM,
No i didn't make the adapter it was done by Sulman of Sinner when i bought the host for it. The threads are 25 x 0.5 and working on getting the tooling for these BE's. The way that the 3x Sanwu BE sits on a laser will not do due to the 10x is much larger and heavier. So the back of the adapter should be machined to fit around the OD of the laser with set screws. i changed the set screws in mine to nylon tipped so not to mar the finish..

 

[BobMc]

HI BM,
No i didn't make the adapter it was done by Sulman of Sinner when i bought the host for it. The threads are 25 x 0.5 and working on getting the tooling for these BE's. The way that the 3x Sanwu BE sits on a laser will not do due to the 10x is much larger and heavier. So the back of the adapter should be machined to fit around the OD of the laser with set screws. i changed the set screws in mine to nylon tipped so not to mar the finish..

Gotcha, very nice adapter , think the nylon tipped screws are a nice addition. When you get the tooling give me a shout, like to talk to you about making one for me. When you have the time. Hope all is well

 

[Lifetime17]

Hi BM,
Yes i will when i get the tooling contacted the machine shop about ordering yesterday. Just been very busy at my job lately, I will start a new sales thread combining all the hosts, heat sinks and focus rings in one spot for easy viewing this weekend.

Rich