Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



SOLD OUT.!!! Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

lazeerer

New member
Joined
May 25, 2010
Messages
3,664
Points
0
Hey All,



*SOLD OUT*
If enough interest in shown I might continue to sell some more of these guys.

So if you are Interested Please Post the Milliamp "mA" Range you would most like to have.

Thank You








**0 Left**

For Sale are 6 Mini X-Drive V6's.



There are a few Pre Set Ranges you can choose From for now but there will be more Ranges If i decided to sell anymore of this Version.:)

All Currants are +/-10mA....

750mA
1220mA
1500mA

:D

The 750mA is set for the NEW Mitsubishi 300mW Diodes and Works off 1x lithium-ion 3.7v cell only. This is a Safe Currant to run these diodes at.

The 1220mA is for 445nm and Runs off 2x 3.7v cells.

The 1500mA is for 445nm as well and you can use the same 2x 3.7v cells.



Driver Dimension are:

15.5mm Long x 10.3mm Wide x 1.5mm Thick.




This one will not fit inside an Axiz Module but will fit Perfect inside the Heatsink Behind the Aixiz Module that holds your diode. "Please look at Picture Bellow"

The Driver has a Set up where you can Either Attach it Directly to the Back of the Diode or Run Leads Off it to your Diode.

NO Heatsink is Required for use with this X-Drive or any of my X-Drive Drivers.:cool:


Here are some Pictures of the Driver:






On top of a USA Dime.


Connected to a diode.






Connected to the back of the Diode showing the Fit inside the Heatsink.








X-Drive Wiring Diagram.




Once all 6 are sold i will make them as i will know which set resistor to use for your Drivers and I can Reflow them all at once.:)



Post on Pm me.:)




As Always...



:thanks: For Looking.!!!
 
Last edited:



StokTT

New member
Joined
May 31, 2011
Messages
84
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

PM for 2
Thanks
 

lazeerer

New member
Joined
May 25, 2010
Messages
3,664
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

4 Left.:)
 

jimdt7

Well-known member
Joined
Feb 5, 2011
Messages
1,899
Points
48
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

Can you take a picture of the other side of the driver ?
 

ped

Well-known member
Joined
Nov 25, 2008
Messages
4,902
Points
113
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

are these boost/buck??
Just wondering what the coil is for...if it uses 2 x 3.7 cells?
 

bennett326

Well-known member
Joined
May 10, 2011
Messages
1,964
Points
48
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

Its buck I would assume

Jim: he obviously doesn't want to reveal what ic he is using
 
Last edited:

lazeerer

New member
Joined
May 25, 2010
Messages
3,664
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

Can you take a picture of the other side of the driver ?
I Missed the Backside Picture In the Op. I will Update it Now. But here is A Quick One.



are these boost/buck??
Just wondering what the coil is for...if it uses 2 x 3.7 cells?
Its a Buck.:)
 
Last edited:

bennett326

Well-known member
Joined
May 10, 2011
Messages
1,964
Points
48
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

Coool Ic man :D
 

lazeerer

New member
Joined
May 25, 2010
Messages
3,664
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

Thanks.:)

Love this Driver.:D

But i guess thats Biased.:undecided:
 
Last edited:

jimdt7

Well-known member
Joined
Feb 5, 2011
Messages
1,899
Points
48
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

Its buck I would assume

Jim: he obviously doesn't want to reveal what ic he is using
Even with a picture of the other side i cant recognise the IC. But thats not what i wanted to see. I am building a boost drive also so i wanted to see how many parts he is using thats all !
 
Last edited:

lazeerer

New member
Joined
May 25, 2010
Messages
3,664
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

Even with a picture of the other side i cant recognise the IC. But thats not what i wanted to see. I am building a boost drive also so i wanted to see how many parts he is using thats all !
Its 11 or 12 depending on how many set resistors i use.:)
 

jakeGT

New member
Joined
Oct 29, 2010
Messages
3,544
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

I want the 635 one! Shoot me a pm Angelos I'm at work
 
Last edited:

lazeerer

New member
Joined
May 25, 2010
Messages
3,664
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

^^^ You GOt it Buddy. Pm Sent.:cool:



3 Left...
 

eytyxhs

New member
Joined
Nov 3, 2010
Messages
2,077
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

2 Left...:D
 
Last edited:

lazeerer

New member
Joined
May 25, 2010
Messages
3,664
Points
0
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

^Yep. Got your PM.:)

There are 2 Left.:)
 

Garoq

Well-known member
Joined
Aug 27, 2010
Messages
1,465
Points
83
Re: FS: Mini X-Drive V6's For Mitsubishi 635nm & 445nm diodes

I think that these are some of the best drivers in the hobby. I've been using the pot adjustable versions for testing a number of our diodes and they work great.
 







Top