Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

SOLD: Custom Host NDG700 Build

ElectricPlasma

ElectricPlasma

0
Joined
Dec 11, 2015
Messages
1,628
Points
113
For everyone in the USA, if you're interested let me know if there's anything extra you'd like me to do for customs, ship the module separately, etc.

If anyone remembers a thread I did a long while ago about something being on the diode window there was some sort of contaminant, here's an updated shot:
21ayce8.jpg

A good idea would be to give the diode window a good cleaning anyway, I've never tried to clean it unless compressed air counts (that didn't end up working entirely)

All prices are in USD, unless stated otherwise

Asking 195.00 for this, plus 12$ to the USA, or 20$ to ship the module separately. Very good unit here, no scratches and very little run time. If you couldn't tell already I'm more so interested in the blue wavelengths.

For shipping to Canada, I believe it's 11$CAD for a tracked packet
For internationals interested PM me for shipping info

The host was created by Ehgemus, so that's a plus for anyone looking for a good looking host build too. The focus ring I had ordered from Flaminpyro, though a long while ago I replaced the lens (I can't remember what lens, probably 3E though not entirely sure) and the focus ring ate too much length on the barrel. I will include it with the build anyway. PM Lifetime17 or Flaminpyro for a different focus ring, and I suppose I could build this module into a different host but I'd like to sell this one.

First two pics is how the host looks like with the focus ring mounted, the last two pics is how the unit will come. The focus ring will be included on the side and not mounted on the lens barrel as said earlier because it doesn't fit.

281exxk.jpg

295pfkk.jpg

2mq7swl.jpg

33w19v9.jpg


To recap, here's some details:
  • 520nm
  • 800mW
  • 2*18350s/16340s
  • Asking 195.00$USD + shipping

Thanks for looking! :D

-E.P.
 
Last edited:





Re: FS: Custom Host NDG700 Build

Bump since there was a bit of a hiccup in approval!

Thanks to Hap for helping out with it :yh:
 
Re: FS: Custom Host NDG700 Build

Hi EP,
Good luck with the sale thats a great host i also have a few of Harolds host and some Sinners to sitting around to build.About the focus knob threads i had the same problems when these guys made them they're to deep for the lens barrels. When i thread a focus knob i only thread about 3 to 4 full threads you really have to watch that.
Oh and about that bad diode window another option is to decan it and/or back lasing..but have to be careful of the bare emitters

Rich:)
 
Last edited:
Re: FS: Custom Host NDG700 Build

Really nice looking host. Couple of questions?

1 Is the driver sinked to the heatsink or attached to the diode?
2 Does it have a tail clicky also?

Kinda interested in this one ?
 
Last edited:
Re: FS: Custom Host NDG700 Build

Lifetime17 said:
Hi EP,
Good luck with the sale thats a great host i also have a few of Harolds host and some Sinners to sitting around to build.About the focus knob threads i had the same problems when these guys made them they're to deep for the lens barrels. When i thread a focus knob i only thread about 3 to 4 full threads you really have to watch that.
Oh and about that bad diode window another option is to decan it and/or back lasing..but have to be careful of the bare emitters

Rich:)
Click to expand...

Thanks Rich, it's one of my most solid builds, but sadly over the months I've lost interest. Thought it might be better in someone elses hands. The diode window actually isn't doing too bad, but could definitely use a good cleaning by whoever's interested. If anyone would like a custom focus ring you're definitely our guy! :yh:

BobMc said:
Really nice looking host. Couple of questions?

1 Is the driver sinked to the heatsink or attached to the diode?
2 Does it have a tail clicky?

Kinda interested in this one ?
Click to expand...

Hey Bob, the driver doesn't need much sinking and therefore is attached to diode inside the module. It'll probably do around 2 mins of runtime before cooling down for a bit. It doesn't have a tail clicky, but rather a side momentary button.

Feel free to PM me for anything else :D
 
Re: FS: Custom Host NDG700 Build

ElectricPlasma said:
Thanks Rich, it's one of my most solid builds, but sadly over the months I've lost interest. Thought it might be better in someone elses hands. The diode window actually isn't doing too bad, but could definitely use a good cleaning by whoever's interested. If anyone would like a custom focus ring you're definitely our guy! :yh:



Hey Bob, the driver doesn't need much sinking and therefore is attached to diode inside the module. It'll probably do around 2 mins of runtime before cooling down for a bit. It doesn't have a tail clicky, but rather a side momentary button.

Feel free to PM me for anything else :D
Click to expand...

Ok thanks for the info? :thinking: :)
 
Re: FS: Custom Host NDG700 Build

Can you take a photo of that beam on the wall through some goggles so it isn't so over saturated?
 
Re: FS: Custom Host NDG700 Build

Alaskan said:
Can you take a photo of that beam on the wall through some goggles so it isn't so over saturated?
Click to expand...

Sure Alaskan, tried a couple shots and this was the best I got. Output got clipped a bit off of the bulletin board I used but I think I got what matters for most part, might try again later when I've got more time if you'd like.

21ayce8.jpg


edit: also added to the op for the time being
 
Last edited:
Re: FS: Custom Host NDG700 Build

Freaking good deal. These are usually at least $300 new.
 
BobMc said:
Congrats on you sale EP, somebody's going to be one happy camper. Beside one less thing for me to think about. :wave:
Click to expand...

Thank you, Bob, though I've got a couple things planned for sale in the next couple of weeks, might have you thinking again :D
 
You must log in or register to reply here.


Back
Top