SOLD!!!240mW Red Laser in Colman Max Host SOLD.!!!

[lazeerer]

Hi All

For Sale is a Brand New Focusable 240mW "Guaranteed Power" Red Laser in a Colman Max Host.:eg:

This Laser runs off of 2X CR2 batteries. You can Use Disposables or 2x 3V CR2 Rechargeable. It Also has AR Coated lens. Driver is a LM1117.

The 240mW Colmen Max Laser has a forward clicky. So if you press lightly it acts as a momentary button, Press it all the way in and laser stays On. "CW". It has a much better and heavier duty spring in the module then the standered Aixiz.


Laser Comes With:

-240mW Colman Max Laser "Has been tested on my LPM" "Guaranteed Power"
-2x Disposable Duracell CR2 Cells (Can also use 2x 3.0v CR2 Rechargeable)
-1x AR Coated Lens
-Wrist Strap
-GITD Dust Cap
-Warranty

-2 Weeks Warranty on the diode - 1 month on the driver/click & lens.
As long as you dint cause the damage i will replace that part fully on me shipping and all under the Warranty time frame above..

Here are some Pictures:

Everything you get. I forgot to put in the Dust cover in the Picture.

Nice Red ring around the Tail switch to match the Kind of laser it is.

AR coated Lens.

Small.

No fog.

With very little fog in the Room.

The Second beam from the Right.
Little fog in the room.



SOLD>!!!!

Will ship Next Day Excluding Sundays.


PM Me or Post.



Thanks For Looking... :beer:

 

[boosted_4cyl]

Re: FS: 300mW Red 650nm in Colman Max Host

I love the coleman max hosts! I remember when moh was selling these on ebay years ago. In fact I believe thats how I found this place!
These hosts are very nice. Very solid and have a quality/sturdy feel to them.
If I didnt have a LOC in an aixiz module waiting to go into something I would be all over this.

 

[lazeerer]

Re: FS: 300mW Red 650nm in Colman Max Host

Thanks. Yea this Host is Awesome. Its one of my favorite especially for Red laser because of the Red ring around the tail clicky.

Power has also been test with a LPM.

 

[Lazy Laser]

Re: FS: 300mW Red 650nm in Colman Max Host

That is one fine laser, good luck with the sale :beer:

 

[lazeerer]

Re: FS: 300mW Red 650nm in Colman Max Host

Price Drop

 

[DJNY]

Re: FS: 300mW Red 650nm in Colman Max Host

Have a near 400mW 650nm in this host - one of the most beautiful hosts around!

Good luck with your sale :beer:

 

[lazeerer]

Re: FS: 240mW Red 650nm in Colman Max Host

^ Thank you My Friend. It is one good looking host. 400mW thats Nuts. Is that with the 650-G-1 Lens.?

300mW Sold.!!!

240mW one is still up for 85$ Free Shipping Priority in the US and Free standard shipping international.

 

[DJNY]

Re: FS: 240mW Red 650nm in Colman Max Host

Yes with the G1.

Attached mine next to the RC-A2.

Now - back to your sale

 

[Mag1c]

Re: FS: 240mW Red Laser in Colman Max Host

pm'ed!

 

[lazeerer]

Re: FS: 240mW Red Laser in Colman Max Host

sold.!!!

 

[Mag1c]

to me! haha.

 

[lazeerer]

Great will ship tomorrow Morning.

:thanks:

 

[Elektrotechniker]

Hey lazeerer. I have spare LOC diodes and one of this hosts. I do have some lm1117's too. Would you share the driver design please? Hope it's not lame or something. I just have everything I need to build one like this, I think.

 

[lazeerer]

lame.?

Its the same design you did on your PHR-803T Hotlight build but using a 3ohm Resistor.

 

[Elektrotechniker]

lame.?

Its the same design you did on your PHR-803T Hotlight build but using a 3ohm Resistor.

It's just that its more or less your design. Anyway it seems you do not have a problem, so, do you use a capacitor before the diode and what current do you achieve with this setup?

 

[lazeerer]

You should know me by now buddy.

Yea i use a capacitor before the diode and the currant was set to 417mA. + I have Hetsinked the chip for best performance.