Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Possible or not?

arksys

0
Joined
Nov 16, 2011
Messages
3
Points
0
Hi All,
I've posted this before but thought it might be an idea to try again. Would it be possible to project a 1 metre grid onto a concrete floor covering an area 100 metres by 80 metres with a maximum tolerance of 5mm?

Many thanks in advance.
 





Joined
Mar 27, 2011
Messages
14,125
Points
113
Possible. Yes.

Easily done. No.

Ridiculously expensive. BIG yes. Especially with low tolerance, and I assume some level of portability, and ability to reprogam.

This might be a question better suited to photonlexicon than laser pointer forums, as it would be a very advanced project. This is more of a beginner - entry level - hobbyist forum.

Edit: A custom diffraction grating, couples with a labbie, if suspended from a specific height, could work. Of course getting that to work with a 5mm tolerance.... good luck.
 
Last edited:




Top