Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Please help me build a driver

Joined
Feb 29, 2012
Messages
9
Points
0
Hi I am taking the diode out of a 24 X dvd burner and I would like to build a driver.. Can anyone tell me exactly what I need and how to do it? I would appreciate your help greatly
 





First off, a 24x diode is square and pretty nasty to try and integrate into a build. I've only seen it done once or twice. I'd recommend buying an LPC-815 sled or and LPC-826 diode.

As for the driver, just read up on building a basic DDL driver.

There are many great threads on how to do so.

This picture shows all the functional components for it.

LM317%20components01.jpg


Remember to get an Aixiz Housing and goggles! :) Good luck!
 
i know what about the more efficient methods of doing so like with the op amps and bucking regs and whatnot
 
I want to build a driver because I figured it would be cheaper. Or does it cost the same to buy one? If so what kind would I buy? And by the way I am a female, so "she" said she wanted to build a driver. ;-)
 
I want to build a driver because I figured it would be cheaper. Or does it cost the same to buy one? If so what kind would I buy? And by the way I am a female, so "she" said she wanted to build a driver. ;-)

well there are many inexpensive drivers. just look around the forums:beer:

If its a linear you want I've got a few left. they are 3$ + shipping
-Anthony
 
Last edited:


Back
Top