Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Perfect 9mm host! :)

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
There's alot of smart, experimental people on this forum so this might have been found before, but on the o-like 532nm green modules, the focusing lens inside the module provides a perfect fit for a bare 9mm diode, when the lens in pushed out of course.

The o-like lens holder will have to be drilled out to provide a hole for the Diode cap to fit through but the end result will provide you with a threaded brass holder for yr 9mm diode that can be screwed into the empty o-like module "where it came from" and from there your own DIY greeny can be afforably achieved by mocking up the o-like crystal set in the same module!

Just a thought!

Have fun
 





ReNNo

0
Joined
Mar 27, 2009
Messages
589
Points
0
There is cheaper and more professional module.

Rayfoss

* 9.0mm ring will ready for market soon

I have this module and must say quality is great.
I expect to receive 9mm ring soon. (Will be ready on 22nd October as they say)

And yes...this module comes with glass lens optimized for RED/IR.
 

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
The best thing about this Renno is that it will fit inside a pen host, being a o-like module, but you wouldnt have a 2w diode in a leadlight anyway, it would most definatley overheat! And you pay $36 for 3 5mw modules, and you get 3 9mm rings, 3 driver boards, 3 crystal sets, 3 500mw 808nm diodes if you can get them out!. So you get a abit for experimentation but as you said, the rayfoss modules are great and i have a few coming!!!
 
Joined
Jun 19, 2009
Messages
2,710
Points
0
I believe the diodes in the 5mW modules are 250mW, only the >100mW have the 500mW. Someone feel free to correct me on this.
 
Joined
Dec 6, 2008
Messages
1,581
Points
63
There is cheaper and more professional module.

Rayfoss

* 9.0mm ring will ready for market soon

I have this module and must say quality is great.
I expect to receive 9mm ring soon. (Will be ready on 22nd October as they say)

And yes...this module comes with glass lens optimized for RED/IR.

Nice find.

Will the axiz lens assembly fit on this module ??

If not, what is the diameter of the threads on the lens assembly ??

I'm always trying to fit better lenses.

Thanks for your help.

LarryDFW
 

Krutz

0
Joined
Nov 21, 2007
Messages
1,733
Points
48
not sure about the diode power. my 120mw o-like draws 600-650mA. the "5mW" ones were up to 30mW actually, all useable. draw 350mA.

thats a good idea, to use those hosts for other 9mm diodes. obvious, but i didnt realize that, although i have one completely open already :)

but then i dont like multimode (9mm) diodes that much, i prefer (less powerful) singlemode diodes with better beamquality..

manuel
 

ReNNo

0
Joined
Mar 27, 2009
Messages
589
Points
0
Nice find.

Will the axiz lens assembly fit on this module ??

If not, what is the diameter of the threads on the lens assembly ??

I'm always trying to fit better lenses.

Thanks for your help.

LarryDFW

Inside diameter is about 11.5mm, aixiz lens assembly can not fit correctly, but lens itself can be replaced with aixiz lens.

Lenses are the same size.
 

Krutz

0
Joined
Nov 21, 2007
Messages
1,733
Points
48
..a source for those 11mm lens "holders" or "nuts" would be nice..
for this "9mm host" mod, as well as for replacing the stock lens on greenies..

sounds like larry is on that already?

manuel
 




Top