New Style Dorcy Jr 12x..

[dieselmarine]

Diode: Lite-On SF-BW512L 12x diode

Lense: Aixiz Glass 405nm lense.

Host: New Style Dorcy Jr.

Heat sink: Made by Ehgemus..Very nice work May I add. My costum glowing front aperture and with the GITD dust cover the front looks SCHWEET!

I powered it up with a Duracell cr123 3.0 primary.

This little beaut is pushing 600mW @ 415mA with aixiz glass 405nm lense.

Here are some pictures.....

 

[ped]

have a nose here big fella, may be of some use?

http://laserpointerforums.com/f40/dirty-lens-54386.html << clicky

Love that build btw...

 

[udanis]

12x Build always impress me. I would say that the lens is dirty but that is pretty "gnarly" looking imperfection so I'm not sure......but Impressive build none the less :beer:

 

[Addonex]

That almost looks like TEM01.. perhaps your diode got hit by static or something during your build?

 

[gillza]

Just curious is the heatsink Aluminum or Copper? How quickly does it heat up?

Im planning on building myself 12x blu-ray and looking for a good host that will allow me long duty cycles

 

[dieselmarine]

have a nose here big fella, may be of some use?

http://laserpointerforums.com/f40/dirty-lens-54386.html << clicky

Love that build btw...

It was the diode window something was singed on the window I think it was a sliver of teflon tape. I cleaned it again and it looked alot better but still not perfect then I used a little rubbing alcohol on a q-tip.... now is perfect!
Thank you guys so much !!!

Just curious is the heatsink Aluminum or Copper? How quickly does it heat up?

Im planning on building myself 12x blu-ray and looking for a good host that will allow me long duty cycles

Aluminum! Its starts to warm up after a minute on....I use a minute 1/2 on 2 minutes off duty cycles