Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

New Host from Sinner

busman2

Active member
Joined
Jan 22, 2014
Messages
466
Points
28
Well here you go people's, 2 New Hosts from Sinner, designed by Busman2 with sinners help on refining!

Presenting the Busman Sceptre!

Copper hosts with Brass, Copper and Aluminium "Tri colour" sleeves. 30mm in diameter.

I have to tell you that these Bad Boys are made for the job, no pussies here folks they are the Real Deal, the Duck's Nut's so to speak. Made to slip one of DTR's 12mm modules. The Mini Sceptre takes a single 18650 Li-ion while its Big Brother Takes 2 18650 Li-ions and when fully loaded will weigh in at nearly a kilo which in pounds is, well whatever pounds is in metric! :D



Now whilst these 2 hosts were not exactly what I wanted they are pretty close to it due to engineering limitations and my shoddy drawings this is what Sinner came up with and they are AWSOME!



The machining is top quality with eye for detail. It did take awhile for them to be made due to Sinner being very busy and then there was a problem with the first batch of switches so he had to wait for more to arrive but after a couple of delays and some anxious moments they arrived today. The 2 x 18650 will house my 462-472nm 9mm in DTR module and I will let you see that when it is done. The single 18650 is still looking for its light source.:thinking:


It was a long time coming but…..
Here are a couple of pics with the M16 405nm 850mW





That is the Mini Sceptre. I had a few problems with the full size 18650 x 2. once they were resolved I went and put in my 462nm module and Pffft Gone. so Got another from DTR and it burnt dimly for 15sec and Pffft So now I am looking for something a bit less expensive to install in it.

Now that Sinner has made these two prototypes he may be willing to make some more or something similar, yes they are a bit more expensive than most other hosts you would buy but if you are looking for that something Special, the King or Queen of your collection, the one that will be Sovereign over all, then ask Sinner about the Busman Sceptre!

I thank Sinner for his time and patience in making these and having to followup on all my emails. Also If there is anything you wish to add/correct here Sinner please feel free to do so.:beer:
 
Last edited:

danefex

Well-known member
Joined
Aug 30, 2010
Messages
1,668
Points
63
Sinner never ceases to amaze, nice work!!!

:beer:
 

Rifter

New member
Joined
May 8, 2014
Messages
572
Points
0
Looks great, I'll be picking up my custom sinner host from dhl later today. He really does do amazing work.
 

grainde

Well-known member
Joined
Jan 29, 2012
Messages
3,159
Points
113
Those look fantastic and very similar to the Sirius 1 C hosts. ;) Beautiful machining from Sinner, but we wouldnt expect anything less! Hopefully he will offer these, or similar ones, for sale! :beer:
 

ChaosLord

New member
Joined
Feb 18, 2013
Messages
763
Points
0
Those do look sweet. Great job to the both of you. That 462nm should be quite happy in there!
 

EpicHam

New member
Joined
May 17, 2013
Messages
1,022
Points
0
steampunk lasers. Does it run on steam and coal as well ? Now I've seen everything.

Lasers are going avant garde eh lol :D

HAIL SINNER THE AVANT GARDE LASER ARTISTS
:worthy:
 

sinner

Well-known member
Joined
Oct 27, 2011
Messages
2,571
Points
83


Now offering.. Busman's sceptre. A seamless tri-metal design with smooth texture,
A part of sales goes to busman2 for designing such a brilliant host.

I have acquired all the parts/tools to make 2-3 more hosts, They have 10Amp switches installed with solid brass contacts, a rubber boot that is inter-changeable.
 

busman2

Active member
Joined
Jan 22, 2014
Messages
466
Points
28


Now offering.. Busman's sceptre. A seamless tri-metal design with smooth texture,
A part of sales goes to busman2 for designing such a brilliant host.

I have acquired all the parts/tools to make 2-3 more hosts, They have 10Amp switches installed with solid brass contacts, a rubber boot that is inter-changeable.
That is very generous of you Sinner. Seeing as one good turn does another I will also make an opportunity for others. Whoever buys one of these hosts from Sinner the money that Sinnner would have past on to me can go to Avery to help him keep this forum running.
I am not issuing any sort of "Bucket Challenge" but if you can please give a little back to this forum. Every month I see Avery struggle to meet the $400 needed to keep this going, most months he never reaches the target so please give even just a little. The month end is here and just over halfway has been reached!
Thanks LPF and thanks Sinner!
 

sinner

Well-known member
Joined
Oct 27, 2011
Messages
2,571
Points
83
This is truly an amazing thing you're doing Shane, but I would like to give credit where its due.
 

busman2

Active member
Joined
Jan 22, 2014
Messages
466
Points
28
Ok thanks Sinner. You better see if you can sell one first!:D
 

busman2

Active member
Joined
Jan 22, 2014
Messages
466
Points
28
:bumpit:

Well it took me awhile to get around to doing it but I have added a couple of pics with the Mini Sceptre in action. The Full sized sceptre is due to unforeseen circumstances still a work in progress, no hurry! Lol
 




Top