Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Need help finding tailcap replacement

Misho5z

New member
Joined
Jun 22, 2013
Messages
115
Points
0
Hi guys, I got a replace 100MW LZSK laser from Lazerer (Max) And it was working fine but the tailcap stopped working again! :cryyy: I wanted to buy two more so I'd have extras but Max emailed me and said: Sorry but those part cannot be sold alone since they come with a set from manufacturer.
So, I was wondering what manufacturer or host it is, and I will try to find someone who can sell me just the tailcaps. Photos are here: Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

I appreciate any help, thank you.
 



Livinloud

New member
Joined
Feb 21, 2013
Messages
5,029
Points
0
this is what you are looking for:







EASY solution, buy a C6 tail cap and use that. it fits thread wise but doesnt screw all the way down. i can test to see if the C6 clikcy drops into the Stick clicky but need to dig my C6 out later. For now ill help you search for that clicky replacement
 

Misho5z

New member
Joined
Jun 22, 2013
Messages
115
Points
0
Ah, thank you. I am looking to find the same one that fits it correctly with the rubber clicky at the back. If no one else can find it I will buy that one, thanks.
 

Livinloud

New member
Joined
Feb 21, 2013
Messages
5,029
Points
0
the rubber piece is separate from the clicky switch. my rubber piece is still in the tail cap as seen in the picture. you might be able to buy a C6 tail cap and take the clicky switch out and put in the original one but need to test fitment later tonight.
 

Misho5z

New member
Joined
Jun 22, 2013
Messages
115
Points
0
Well if you can get one that fits my lzsk and is silver so it doesn't look strange, if you have a rubber attachment that is black, (whichever one you have) looks cool, then I'll buy 2, just tell me the price ;) thanks :D
 
Last edited:

Livinloud

New member
Joined
Feb 21, 2013
Messages
5,029
Points
0
actually im trying to find just the piece that screws in. no point in buying a while new tail cap if only the switch is broken (unless the full tail cap is cheaper)
 

Misho5z

New member
Joined
Jun 22, 2013
Messages
115
Points
0
Oh I'm not educated in anything electrical, the lasers are just a hobby to me, I don't build them or assemble them really.
 

Livinloud

New member
Joined
Feb 21, 2013
Messages
5,029
Points
0
im no electrical engineer either. to tell you the truth most electrical questions stump me. clicky switches however are easy as heck, they come per-assembled and you just screw the old one out and screw the new one in :D cant get easier than that!
 

Misho5z

New member
Joined
Jun 22, 2013
Messages
115
Points
0
Oh really? I wasn't sure but I actually wanted to get a new one as well since it has a bit of a bump and a chunk out of it, I was actually meaning to sell one of the two so I can fund a zerolasers XML 3.1W weapon of mass destruction ;P
 

Livinloud

New member
Joined
Feb 21, 2013
Messages
5,029
Points
0
ahhhhh i see now. ill keep my eye out for the complete tail cap then. good to know so i dont just search for clicky switches lol
 

Livinloud

New member
Joined
Feb 21, 2013
Messages
5,029
Points
0
They all look like they would work size wise but the problem you have is color might not match up since the LZSK is gunmetal gray and some of those are silver or polished looking. Also the LZSK tailcap is taller than a C6 so you need a semi tall tail cap. id go with the cheapest ones just in case they dont fit. Probably grab two flashlights and worst case, you have to nice EDC flashlights.

UltraFire White LED Light Cree XP-G R5 Flashlight (ZB-006) - buy Zooming led flashlight
the above looks like the best bet as far as perfect fit IMO

This looks very close as far as color wise, might be a slight gap if its not long enough though
NEW-528 Cree Q5 3 Mode 170 Lumen Convex Lens LED Flashlight Torch with Strap (1*18650) - Aurabuy

This may also work as well
http://www.aurabuy.com/h-m2-cree-q5-5-mode-250-lumens-led-flashlight-torch-silver-1-18650.html
 

Livinloud

New member
Joined
Feb 21, 2013
Messages
5,029
Points
0
They all look like they would work size wise but the problem you have is color might not match up since the LZSK is gunmetal gray and some of those are silver or polished looking. Also the LZSK tailcap is taller than a C6 so you need a semi tall tail cap. id go with the cheapest ones just in case they dont fit. Probably grab two flashlights and worst case, you have to nice EDC flashlights.

UltraFire White LED Light Cree XP-G R5 Flashlight (ZB-006) - buy Zooming led flashlight
the above looks like the best bet as far as perfect fit IMO

This looks very close as far as color wise, might be a slight gap if its not long enough though
http://www.aurabuy.com/new-528-cree-q5-3-mode-170-lumen-convex-lens-led-flashlight-torch-with-strap-1-x-18650.html

This may also work as well
H-M2 Cree Q5 5-Mode 250-Lumens LED Flashlight Torch Silver (1*18650) - Free Shipping
 

Misho5z

New member
Joined
Jun 22, 2013
Messages
115
Points
0
thanks a lot man, the clickys look really different compared to the lzsk though, there is a part that extends a lot more than the LZSK one though, you think it'll work?
 




Top