andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
5x aixiz diode presses.
after a had these made aixiz increased the size of the threaded part slightly, do the lip on these no longer fits over the threaded part. but turn them round the other way and they still work very well to press a diode in.
5x brass diode housings. the square ones are 17mm by 17mm by 52mm, with a coated lens for 650nm. the round one measures 17mm dia by 34mm and again the lens is coated for 650nm
5mw 650nm button laser
maxi housing
faulty flexi driver. i accidently soldered a resistor off i believe
empty aries housing
random fan guards
lead light cases. 1 with insides still there, the other two are empty
all sold as seen open to any offers
.
after a had these made aixiz increased the size of the threaded part slightly, do the lip on these no longer fits over the threaded part. but turn them round the other way and they still work very well to press a diode in.
5x brass diode housings. the square ones are 17mm by 17mm by 52mm, with a coated lens for 650nm. the round one measures 17mm dia by 34mm and again the lens is coated for 650nm
5mw 650nm button laser
maxi housing
faulty flexi driver. i accidently soldered a resistor off i believe
empty aries housing
random fan guards
lead light cases. 1 with insides still there, the other two are empty
all sold as seen open to any offers
.
Last edited: